This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 1002, EID 1476, EID 4153, EID 4154, EID 4155, EID 4156, EID 4157, EID 4158, EID 4159, EID 4160, EID 4161, EID 4162, EID 4163, EID 4164, EID 4165, EID 4166, EID 4167
Network Working Group                                           C. Daboo
Request for Comments: 4791                                         Apple
Category: Standards Track                                B. Desruisseaux
                                                                  Oracle
                                                            L. Dusseault
                                                             CommerceNet
                                                              March 2007


               Calendaring Extensions to WebDAV (CalDAV)

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document defines extensions to the Web Distributed Authoring and
   Versioning (WebDAV) protocol to specify a standard way of accessing,
   managing, and sharing calendaring and scheduling information based on
   the iCalendar format.  This document defines the "calendar-access"
   feature of CalDAV.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  5
     1.1.  Notational Conventions . . . . . . . . . . . . . . . . . .  5
     1.2.  XML Namespaces and Processing  . . . . . . . . . . . . . .  5
     1.3.  Method Preconditions and Postconditions  . . . . . . . . .  6
   2.  Requirements Overview  . . . . . . . . . . . . . . . . . . . .  6
   3.  Calendaring Data Model . . . . . . . . . . . . . . . . . . . .  7
     3.1.  Calendar Server  . . . . . . . . . . . . . . . . . . . . .  7
     3.2.  Recurrence and the Data Model  . . . . . . . . . . . . . .  8
   4.  Calendar Resources . . . . . . . . . . . . . . . . . . . . . .  9
     4.1.  Calendar Object Resources  . . . . . . . . . . . . . . . .  9
     4.2.  Calendar Collection  . . . . . . . . . . . . . . . . . . . 10
   5.  Calendar Access Feature  . . . . . . . . . . . . . . . . . . . 11
     5.1.  Calendar Access Support  . . . . . . . . . . . . . . . . . 11
       5.1.1.  Example: Using OPTIONS for the Discovery of
               Calendar Access Support  . . . . . . . . . . . . . . . 12
     5.2.  Calendar Collection Properties . . . . . . . . . . . . . . 12
       5.2.1.  CALDAV:calendar-description Property . . . . . . . . . 12
       5.2.2.  CALDAV:calendar-timezone Property  . . . . . . . . . . 13
       5.2.3.  CALDAV:supported-calendar-component-set Property . . . 14
       5.2.4.  CALDAV:supported-calendar-data Property  . . . . . . . 15
       5.2.5.  CALDAV:max-resource-size Property  . . . . . . . . . . 16
       5.2.6.  CALDAV:min-date-time Property  . . . . . . . . . . . . 17
       5.2.7.  CALDAV:max-date-time Property  . . . . . . . . . . . . 18
       5.2.8.  CALDAV:max-instances Property  . . . . . . . . . . . . 19
       5.2.9.  CALDAV:max-attendees-per-instance Property . . . . . . 19
       5.2.10. Additional Precondition for PROPPATCH  . . . . . . . . 20
     5.3.  Creating Resources . . . . . . . . . . . . . . . . . . . . 20
       5.3.1.  MKCALENDAR Method  . . . . . . . . . . . . . . . . . . 20
         5.3.1.1.  Status Codes . . . . . . . . . . . . . . . . . . . 22
         5.3.1.2.  Example: Successful MKCALENDAR Request . . . . . . 23
       5.3.2.  Creating Calendar Object Resources . . . . . . . . . . 25
         5.3.2.1.  Additional Preconditions for PUT, COPY, and
                   MOVE . . . . . . . . . . . . . . . . . . . . . . . 26
       5.3.3.  Non-Standard Components, Properties, and Parameters  . 28
       5.3.4.  Calendar Object Resource Entity Tag  . . . . . . . . . 28
   6.  Calendaring Access Control . . . . . . . . . . . . . . . . . . 29
     6.1.  Calendaring Privilege  . . . . . . . . . . . . . . . . . . 29
       6.1.1.  CALDAV:read-free-busy Privilege  . . . . . . . . . . . 29
     6.2.  Additional Principal Property  . . . . . . . . . . . . . . 30
       6.2.1.  CALDAV:calendar-home-set Property  . . . . . . . . . . 30
   7.  Calendaring Reports  . . . . . . . . . . . . . . . . . . . . . 31
     7.1.  REPORT Method  . . . . . . . . . . . . . . . . . . . . . . 31
     7.2.  Ordinary Collections . . . . . . . . . . . . . . . . . . . 31
     7.3.  Date and Floating Time . . . . . . . . . . . . . . . . . . 32
     7.4.  Time Range Filtering . . . . . . . . . . . . . . . . . . . 32
     7.5.  Searching Text: Collations . . . . . . . . . . . . . . . . 33

       7.5.1.  CALDAV:supported-collation-set Property  . . . . . . . 34
     7.6.  Partial Retrieval  . . . . . . . . . . . . . . . . . . . . 34
     7.7.  Non-Standard Components, Properties, and Parameters  . . . 35
     7.8.  CALDAV:calendar-query REPORT . . . . . . . . . . . . . . . 36
       7.8.1.  Example: Partial Retrieval of Events by Time Range . . 38
       7.8.2.  Example: Partial Retrieval of Recurring Events . . . . 42
       7.8.3.  Example: Expanded Retrieval of Recurring Events  . . . 45
       7.8.4.  Example: Partial Retrieval of Stored Free Busy
               Components . . . . . . . . . . . . . . . . . . . . . . 48
       7.8.5.  Example: Retrieval of To-Dos by Alarm Time Range . . . 50
       7.8.6.  Example: Retrieval of Event by UID . . . . . . . . . . 51
       7.8.7.  Example: Retrieval of Events by PARTSTAT . . . . . . . 53
       7.8.8.  Example: Retrieval of Events Only  . . . . . . . . . . 55
       7.8.9.  Example: Retrieval of All Pending To-Dos . . . . . . . 59
       7.8.10. Example: Attempt to Query Unsupported Property . . . . 62
     7.9.  CALDAV:calendar-multiget REPORT  . . . . . . . . . . . . . 63
       7.9.1.  Example: Successful CALDAV:calendar-multiget REPORT  . 64
     7.10. CALDAV:free-busy-query REPORT  . . . . . . . . . . . . . . 66
       7.10.1. Example: Successful CALDAV:free-busy-query REPORT  . . 68
   8.  Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . 69
     8.1.  Client-to-Client Interoperability  . . . . . . . . . . . . 69
     8.2.  Synchronization Operations . . . . . . . . . . . . . . . . 69
       8.2.1.  Use of Reports . . . . . . . . . . . . . . . . . . . . 69
         8.2.1.1.  Restrict the Time Range  . . . . . . . . . . . . . 69
         8.2.1.2.  Synchronize by Time Range  . . . . . . . . . . . . 70
         8.2.1.3.  Synchronization Process  . . . . . . . . . . . . . 70
       8.2.2.  Restrict the Properties Returned . . . . . . . . . . . 72
     8.3.  Use of Locking . . . . . . . . . . . . . . . . . . . . . . 72
     8.4.  Finding Calendars  . . . . . . . . . . . . . . . . . . . . 72
     8.5.  Storing and Using Attachments  . . . . . . . . . . . . . . 74
       8.5.1.  Inline Attachments . . . . . . . . . . . . . . . . . . 74
       8.5.2.  External Attachments . . . . . . . . . . . . . . . . . 75
     8.6.  Storing and Using Alarms . . . . . . . . . . . . . . . . . 76
   9.  XML Element Definitions  . . . . . . . . . . . . . . . . . . . 77
     9.1.  CALDAV:calendar XML Element  . . . . . . . . . . . . . . . 77
     9.2.  CALDAV:mkcalendar XML Element  . . . . . . . . . . . . . . 77
     9.3.  CALDAV:mkcalendar-response XML Element . . . . . . . . . . 78
     9.4.  CALDAV:supported-collation XML Element . . . . . . . . . . 78
     9.5.  CALDAV:calendar-query XML Element  . . . . . . . . . . . . 78
     9.6.  CALDAV:calendar-data XML Element . . . . . . . . . . . . . 79
       9.6.1.  CALDAV:comp XML Element  . . . . . . . . . . . . . . . 80
       9.6.2.  CALDAV:allcomp XML Element . . . . . . . . . . . . . . 81
       9.6.3.  CALDAV:allprop XML Element . . . . . . . . . . . . . . 81
       9.6.4.  CALDAV:prop XML Element  . . . . . . . . . . . . . . . 82
       9.6.5.  CALDAV:expand XML Element  . . . . . . . . . . . . . . 82
       9.6.6.  CALDAV:limit-recurrence-set XML Element  . . . . . . . 83
       9.6.7.  CALDAV:limit-freebusy-set XML Element  . . . . . . . . 84
     9.7.  CALDAV:filter XML Element  . . . . . . . . . . . . . . . . 85

       9.7.1.  CALDAV:comp-filter XML Element . . . . . . . . . . . . 85
       9.7.2.  CALDAV:prop-filter XML Element . . . . . . . . . . . . 86
       9.7.3.  CALDAV:param-filter XML Element  . . . . . . . . . . . 87
       9.7.4.  CALDAV:is-not-defined XML Element  . . . . . . . . . . 88
       9.7.5.  CALDAV:text-match XML Element  . . . . . . . . . . . . 88
     9.8.  CALDAV:timezone XML Element  . . . . . . . . . . . . . . . 89
     9.9.  CALDAV:time-range XML Element  . . . . . . . . . . . . . . 90
     9.10. CALDAV:calendar-multiget XML Element . . . . . . . . . . . 94
     9.11. CALDAV:free-busy-query XML Element . . . . . . . . . . . . 95
   10. Internationalization Considerations  . . . . . . . . . . . . . 95
   11. Security Considerations  . . . . . . . . . . . . . . . . . . . 95
   12. IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 96
     12.1. Namespace Registration . . . . . . . . . . . . . . . . . . 96
   13. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 96
   14. References . . . . . . . . . . . . . . . . . . . . . . . . . . 97
     14.1. Normative References . . . . . . . . . . . . . . . . . . . 97
     14.2. Informative References . . . . . . . . . . . . . . . . . . 98
   Appendix A.  CalDAV Method Privilege Table (Normative) . . . . . . 99
   Appendix B.  Calendar Collections Used in the Examples . . . . . . 99

1.  Introduction

   The concept of using HTTP [RFC2616] and WebDAV [RFC2518] as a basis
   for a calendar access protocol is by no means a new concept: it was
   discussed in the IETF CALSCH working group as early as 1997 or 1998.
   Several companies have implemented calendar access protocols using
   HTTP to upload and download iCalendar [RFC2445] objects, and using
   WebDAV to get listings of resources.  However, those implementations
   do not interoperate because there are many small and big decisions to
   be made in how to model calendaring data as WebDAV resources, as well
   as how to implement required features that aren't already part of
   WebDAV.  This document proposes a way to model calendar data in
   WebDAV, with additional features to make an interoperable calendar
   access protocol.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   The term "protected" is used in the Conformance field of property
   definitions as defined in Section 1.4.2 of [RFC3253].

   When XML element types in the namespaces "DAV:" and
   "urn:ietf:params:xml:ns:caldav" are referenced in this document
   outside of the context of an XML fragment, the string "DAV:" and
   "CALDAV:" will be prefixed to the element type names, respectively.

1.2.  XML Namespaces and Processing

   Definitions of XML elements in this document use XML element type
   declarations (as found in XML Document Type Declarations), described
   in Section 3.2 of [W3C.REC-xml-20060816].

   The namespace "urn:ietf:params:xml:ns:caldav" is reserved for the XML
   elements defined in this specification, its revisions, and related
   CalDAV specifications.  XML elements defined by individual
   implementations MUST NOT use the "urn:ietf:params:xml:ns:caldav"
   namespace, and instead should use a namespace that they control.

   The XML declarations used in this document do not include namespace
   information.  Thus, implementers must not use these declarations as
   the only way to create valid CalDAV properties or to validate CalDAV
   XML element types.  Some of the declarations refer to XML elements
   defined by WebDAV [RFC2518], which use the "DAV:" namespace.
   Wherever such XML elements appear, they are explicitly prefixed with
   "DAV:" to avoid confusion.

   Also note that some CalDAV XML element names are identical to WebDAV
   XML element names, though their namespace differs.  Care must be
   taken not to confuse the two sets of names.

   Processing of XML by CalDAV clients and servers MUST follow the rules
   described in [RFC2518]; in particular, Section 14, and Appendix 3 of
   that specification.

1.3.  Method Preconditions and Postconditions

   A "precondition" of a method describes the state of the server that
   must be true for that method to be performed.  A "postcondition" of a
   method describes the state of the server that must be true after that
   method has been completed.  If a method precondition or postcondition
   for a request is not satisfied, the response status of the request
   MUST either be 403 (Forbidden), if the request should not be repeated
   because it will always fail, or 409 (Conflict), if it is expected
   that the user might be able to resolve the conflict and resubmit the
   request.

   In order to allow better client handling of 403 and 409 responses, a
   distinct XML element type is associated with each method precondition
   and postcondition of a request.  When a particular precondition is
   not satisfied or a particular postcondition cannot be achieved, the
   appropriate XML element MUST be returned as the child of a top-level
   DAV:error element in the response body, unless otherwise negotiated
   by the request.

2.  Requirements Overview

   This section lists what functionality is required of a CalDAV server.
   To advertise support for CalDAV, a server:

   o  MUST support iCalendar [RFC2445] as a media type for the calendar
      object resource format;

   o  MUST support WebDAV Class 1 [RFC2518] (note that [rfc2518bis]
      describes clarifications to [RFC2518] that aid interoperability);

   o  MUST support WebDAV ACL [RFC3744] with the additional privilege
      defined in Section 6.1 of this document;

   o  MUST support transport over TLS [RFC2246] as defined in [RFC2818]
      (note that [RFC2246] has been obsoleted by [RFC4346]);

   o  MUST support ETags [RFC2616] with additional requirements
      specified in Section 5.3.4 of this document;

   o  MUST support all calendaring reports defined in Section 7 of this
      document; and

   o  MUST advertise support on all calendar collections and calendar
      object resources for the calendaring reports in the DAV:supported-
      report-set property, as defined in Versioning Extensions to WebDAV
      [RFC3253].

   In addition, a server:

   o  SHOULD support the MKCALENDAR method defined in Section 5.3.1 of
      this document.

3.  Calendaring Data Model

   One of the features that has made WebDAV a successful protocol is its
   firm data model.  This makes it a useful framework for other
   applications such as calendaring.  This specification follows the
   same pattern by developing all features based on a well-described
   data model.

   As a brief overview, a CalDAV calendar is modeled as a WebDAV
   collection with a defined structure; each calendar collection
   contains a number of resources representing calendar objects as its
   direct child resource.  Each resource representing a calendar object
   (event, to-do, journal entry, or other calendar components) is called
   a "calendar object resource".  Each calendar object resource and each
   calendar collection can be individually locked and have individual
   WebDAV properties.  Requirements derived from this model are provided
   in Section 4.1 and Section 4.2.

3.1.  Calendar Server

   A CalDAV server is a calendaring-aware engine combined with a WebDAV
   repository.  A WebDAV repository is a set of WebDAV collections,
   containing other WebDAV resources, within a unified URL namespace.
   For example, the repository "http://www.example.com/webdav/" may
   contain WebDAV collections and resources, all of which have URLs
   beginning with "http://www.example.com/webdav/".  Note that the root
   URL, "http://www.example.com/", may not itself be a WebDAV repository
   (for example, if the WebDAV support is implemented through a servlet
   or other Web server extension).

   A WebDAV repository MAY include calendar data in some parts of its
   URL namespace, and non-calendaring data in other parts.

   A WebDAV repository can advertise itself as a CalDAV server if it
   supports the functionality defined in this specification at any point

   within the root of the repository.  That might mean that calendaring
   data is spread throughout the repository and mixed with non-calendar
   data in nearby collections (e.g., calendar data may be found in
   /home/lisa/calendars/ as well as in /home/bernard/calendars/, and
   non-calendar data in /home/lisa/contacts/).  Or, it might mean that
   calendar data can be found only in certain sections of the repository
   (e.g., /calendar/).  Calendaring features are only required in the
   repository sections that are or contain calendar object resources.
   Therefore, a repository confining calendar data to the /calendar/
   collection would only need to support the CalDAV required features
   within that collection.

   The CalDAV server or repository is the canonical location for
   calendar data and state information.  Clients may submit requests to
   change data or download data.  Clients may store calendar objects
   offline and attempt to synchronize at a later time.  However, clients
   MUST be prepared for calendar data on the server to change between
   the time of last synchronization and when attempting an update, as
   calendar collections may be shared and accessible via multiple
   clients.  Entity tags and other features make this possible.

3.2.  Recurrence and the Data Model

   Recurrence is an important part of the data model because it governs
   how many resources are expected to exist.  This specification models
   a recurring calendar component and its recurrence exceptions as a
   single resource.  In this model, recurrence rules, recurrence dates,
   exception rules, and exception dates are all part of the data in a
   single calendar object resource.  This model avoids problems of
   limiting how many recurrence instances to store in the repository,
   how to keep recurrence instances in sync with the recurring calendar
   component, and how to link recurrence exceptions with the recurring
   calendar component.  It also results in less data to synchronize
   between client and server, and makes it easier to make changes to all
   recurrence instances or to a recurrence rule.  It makes it easier to
   create a recurring calendar component and to delete all recurrence
   instances.

   Clients are not forced to retrieve information about all recurrence
   instances of a recurring component.  The CALDAV:calendar-query and
   CALDAV:calendar-multiget reports defined in this document allow
   clients to retrieve only recurrence instances that overlap a given
   time range.

4.  Calendar Resources

4.1.  Calendar Object Resources

   Calendar object resources contained in calendar collections MUST NOT
   contain more than one type of calendar component (e.g., VEVENT,
   VTODO, VJOURNAL, VFREEBUSY, etc.) with the exception of VTIMEZONE
   components, which MUST be specified for each unique TZID parameter
   value specified in the iCalendar object.  For instance, a calendar
   object resource can contain one VEVENT component and one VTIMEZONE
   component, but it cannot contain one VEVENT component and one VTODO
   component.  Instead, the VEVENT and VTODO components would have to be
   stored in separate calendar object resources in the same collection.

   Calendar object resources contained in calendar collections MUST NOT
   specify the iCalendar METHOD property.

   The UID property value of the calendar components contained in a
   calendar object resource MUST be unique in the scope of the calendar
   collection in which they are stored.

   Calendar components in a calendar collection that have different UID
   property values MUST be stored in separate calendar object resources.

   Calendar components with the same UID property value, in a given
   calendar collection, MUST be contained in the same calendar object
   resource.  This ensures that all components in a recurrence "set" are
   contained in the same calendar object resource.  It is possible for a
   calendar object resource to just contain components that represent
   "overridden" instances (ones that modify the behavior of a regular
   instance, and thus include a RECURRENCE-ID property) without also
   including the "master" recurring component (the one that defines the
   recurrence "set" and does not contain any RECURRENCE-ID property).

   For example, given the following iCalendar object:

   BEGIN:VCALENDAR
   PRODID:-//Example Corp.//CalDAV Client//EN
   VERSION:2.0
   BEGIN:VEVENT
   UID:1@example.com
   SUMMARY:One-off Meeting
   DTSTAMP:20041210T183904Z
   DTSTART:20041207T120000Z
   DTEND:20041207T130000Z
   END:VEVENT
   BEGIN:VEVENT
   UID:2@example.com
   SUMMARY:Weekly Meeting
   DTSTAMP:20041210T183838Z
   DTSTART:20041206T120000Z
   DTEND:20041206T130000Z
   RRULE:FREQ=WEEKLY
   END:VEVENT
   BEGIN:VEVENT
   UID:2@example.com
   SUMMARY:Weekly Meeting
   RECURRENCE-ID:20041213T120000Z
   DTSTAMP:20041210T183838Z
   DTSTART:20041213T130000Z
   DTEND:20041213T140000Z
   END:VEVENT
   END:VCALENDAR

   The VEVENT component with the UID value "1@example.com" would be
   stored in its own calendar object resource.  The two VEVENT
   components with the UID value "2@example.com", which represent a
   recurring event where one recurrence instance has been overridden,
   would be stored in the same calendar object resource.

4.2.  Calendar Collection

   A calendar collection contains calendar object resources that
   represent calendar components within a calendar.  A calendar
   collection is manifested to clients as a WebDAV resource collection
   identified by a URL.  A calendar collection MUST report the DAV:
   collection and CALDAV:calendar XML elements in the value of the DAV:
   resourcetype property.  The element type declaration for CALDAV:
   calendar is:

       <!ELEMENT calendar EMPTY>

   A calendar collection can be created through provisioning (i.e.,
   automatically created when a user's account is provisioned), or it
   can be created with the MKCALENDAR method (see Section 5.3.1).  This
   method can be useful for a user to create additional calendars (e.g.,
   soccer schedule) or for users to share a calendar (e.g., team events
   or conference rooms).  However, note that this document doesn't
   define the purpose of extra calendar collections.  Users must rely on
   non-standard cues to find out what a calendar collection is for, or
   use the CALDAV:calendar-description property defined in Section 5.2.1
   to provide such a cue.

   The following restrictions are applied to the resources within a
   calendar collection:

   a.  Calendar collections MUST only contain calendar object resources
       and collections that are not calendar collections, i.e., the only
       "top-level" non-collection resources allowed in a calendar
       collection are calendar object resources.  This ensures that
       calendar clients do not have to deal with non-calendar data in a
       calendar collection, though they do have to distinguish between
       calendar object resources and collections when using standard
       WebDAV techniques to examine the contents of a collection.

   b.  Collections contained in calendar collections MUST NOT contain
       calendar collections at any depth, i.e., "nesting" of calendar
       collections within other calendar collections at any depth is not
       allowed.  This specification does not define how collections
       contained in a calendar collection are used or how they relate to
       any calendar object resources contained in the calendar
       collection.

   Multiple calendar collections MAY be children of the same collection.

5.  Calendar Access Feature

5.1.  Calendar Access Support

   A server supporting the features described in this document MUST
   include "calendar-access" as a field in the DAV response header from
   an OPTIONS request on any resource that supports any calendar
   properties, reports, method, or privilege.  A value of "calendar-
   access" in the DAV response header MUST indicate that the server
   supports all MUST level requirements specified in this document.

5.1.1.  Example: Using OPTIONS for the Discovery of Calendar Access
        Support

   >> Request <<

   OPTIONS /home/bernard/calendars/ HTTP/1.1
   Host: cal.example.com

   >> Response <<

   HTTP/1.1 200 OK
   Allow: OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, COPY, MOVE
   Allow: PROPFIND, PROPPATCH, LOCK, UNLOCK, REPORT, ACL
   DAV: 1, 2, access-control, calendar-access
   Date: Sat, 11 Nov 2006 09:32:12 GMT
   Content-Length: 0

   In this example, the OPTIONS method returns the value "calendar-
   access" in the DAV response header to indicate that the collection
   "/home/bernard/calendars/" supports the properties, reports, method,
   or privilege defined in this specification.

5.2.  Calendar Collection Properties

   This section defines properties for calendar collections.

5.2.1.  CALDAV:calendar-description Property

   Name:  calendar-description

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a human-readable description of the calendar
      collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MAY be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).  An xml:lang attribute indicating the human
      language of the description SHOULD be set for this property by
      clients or through server provisioning.  Servers MUST return any
      xml:lang attribute if set for the property.

   Description:  If present, the property contains a description of the
      calendar collection that is suitable for presentation to a user.
      If not present, the client should assume no description for the
      calendar collection.

   Definition:

         <!ELEMENT calendar-description (#PCDATA)>
         PCDATA value: string

   Example:

         <C:calendar-description xml:lang="fr-CA"
            xmlns:C="urn:ietf:params:xml:ns:caldav"
         >Calendrier de Mathilde Desruisseaux</C:calendar-description>

5.2.2.  CALDAV:calendar-timezone Property

   Name:  calendar-timezone

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Specifies a time zone on a calendar collection.

   Conformance:  This property SHOULD be defined on all calendar
      collections.  If defined, it SHOULD NOT be returned by a PROPFIND
      DAV:allprop request (as defined in Section 12.14.1 of [RFC2518]).

   Description:  The CALDAV:calendar-timezone property is used to
      specify the time zone the server should rely on to resolve "date"
      values and "date with local time" values (i.e., floating time) to
      "date with UTC time" values.  The server will require this
      information to determine if a calendar component scheduled with
      "date" values or "date with local time" values overlaps a CALDAV:
      time-range specified in a CALDAV:calendar-query REPORT.  The
      server will also require this information to compute the proper
      FREEBUSY time period as "date with UTC time" in the VFREEBUSY
      component returned in a response to a CALDAV:free-busy-query
      REPORT request that takes into account calendar components
      scheduled with "date" values or "date with local time" values.  In
      the absence of this property, the server MAY rely on the time zone
      of their choice.

   Note:  The iCalendar data embedded within the CALDAV:calendar-
      timezone XML element MUST follow the standard XML character data
      encoding rules, including use of &lt;, &gt;, &amp; etc. entity
      encoding or the use of a <![CDATA[ ... ]]> construct.  In the
      later case, the iCalendar data cannot contain the character
      sequence "]]>", which is the end delimiter for the CDATA section.

   Definition:

         <!ELEMENT calendar-timezone (#PCDATA)>
         PCDATA value: an iCalendar object with exactly one VTIMEZONE
               component.

   Example:

   <C:calendar-timezone
       xmlns:C="urn:ietf:params:xml:ns:caldav">BEGIN:VCALENDAR
   PRODID:-//Example Corp.//CalDAV Client//EN
   VERSION:2.0
   BEGIN:VTIMEZONE
   TZID:US-Eastern
   LAST-MODIFIED:19870101T000000Z
   BEGIN:STANDARD
   DTSTART:19671029T020000
   RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
   TZOFFSETFROM:-0400
   TZOFFSETTO:-0500
   TZNAME:Eastern Standard Time (US &amp; Canada)
   END:STANDARD
   BEGIN:DAYLIGHT
   DTSTART:19870405T020000
   RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4
   TZOFFSETFROM:-0500
   TZOFFSETTO:-0400
   TZNAME:Eastern Daylight Time (US &amp; Canada)
   END:DAYLIGHT
   END:VTIMEZONE
   END:VCALENDAR
   </C:calendar-timezone>

5.2.3.  CALDAV:supported-calendar-component-set Property

   Name:  supported-calendar-component-set

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Specifies the calendar component types (e.g., VEVENT,
      VTODO, etc.) that calendar object resources can contain in the
      calendar collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:supported-calendar-component-set property is
      used to specify restrictions on the calendar component types that
      calendar object resources may contain in a calendar collection.
      Any attempt by the client to store calendar object resources with
      component types not listed in this property, if it exists, MUST
      result in an error, with the CALDAV:supported-calendar-component
      precondition (Section 5.3.2.1) being violated.  Since this
      property is protected, it cannot be changed by clients using a
      PROPPATCH request.  However, clients can initialize the value of
      this property when creating a new calendar collection with
      MKCALENDAR.  The empty-element tag <C:comp name="VTIMEZONE"/> MUST
      only be specified if support for calendar object resources that
      only contain VTIMEZONE components is provided or desired.  Support
      for VTIMEZONE components in calendar object resources that contain
      VEVENT or VTODO components is always assumed.  In the absence of
      this property, the server MUST accept all component types, and the
      client can assume that all component types are accepted.

   Definition:

         <!ELEMENT supported-calendar-component-set (comp+)>

   Example:

         <C:supported-calendar-component-set
             xmlns:C="urn:ietf:params:xml:ns:caldav">
           <C:comp name="VEVENT"/>
           <C:comp name="VTODO"/>
         </C:supported-calendar-component-set>

5.2.4.  CALDAV:supported-calendar-data Property

   Name:  supported-calendar-data

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Specifies what media types are allowed for calendar object
      resources in a calendar collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:supported-calendar-data property is used to
      specify the media type supported for the calendar object resources
      contained in a given calendar collection (e.g., iCalendar version
      2.0).  Any attempt by the client to store calendar object

      resources with a media type not listed in this property MUST
      result in an error, with the CALDAV:supported-calendar-data
      precondition (Section 5.3.2.1) being violated.  In the absence of
      this property, the server MUST only accept data with the media
      type "text/calendar" and iCalendar version 2.0, and clients can
      assume that the server will only accept this data.

   Definition:

         <!ELEMENT supported-calendar-data (calendar-data+)>

   Example:

         <C:supported-calendar-data
            xmlns:C="urn:ietf:params:xml:ns:caldav">
           <C:calendar-data content-type="text/calendar" version="2.0"/>
         </C:supported-calendar-data>

5.2.5.  CALDAV:max-resource-size Property

   Name:  max-resource-size

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a numeric value indicating the maximum size of a
      resource in octets that the server is willing to accept when a
      calendar object resource is stored in a calendar collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:max-resource-size is used to specify a
      numeric value that represents the maximum size in octets that the
      server is willing to accept when a calendar object resource is
      stored in a calendar collection.  Any attempt to store a calendar
      object resource exceeding this size MUST result in an error, with
      the CALDAV:max-resource-size precondition (Section 5.3.2.1) being
      violated.  In the absence of this property, the client can assume
      that the server will allow storing a resource of any reasonable
      size.

   Definition:

         <!ELEMENT max-resource-size (#PCDATA)>
         PCDATA value: a numeric value (positive integer)

   Example:

         <C:max-resource-size xmlns:C="urn:ietf:params:xml:ns:caldav"
         >102400</C:max-resource-size>

5.2.6.  CALDAV:min-date-time Property

   Name:  min-date-time

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a DATE-TIME value indicating the earliest date and
      time (in UTC) that the server is willing to accept for any DATE or
      DATE-TIME value in a calendar object resource stored in a calendar
      collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:min-date-time is used to specify an
      iCalendar DATE-TIME value in UTC that indicates the earliest
      inclusive date that the server is willing to accept for any
      explicit DATE or DATE-TIME value in a calendar object resource
      stored in a calendar collection.  Any attempt to store a calendar
      object resource using a DATE or DATE-TIME value earlier than this
      value MUST result in an error, with the CALDAV:min-date-time
      precondition (Section 5.3.2.1) being violated.  Note that servers
      MUST accept recurring components that specify instances beyond
      this limit, provided none of those instances have been overridden.
      In that case, the server MAY simply ignore those instances outside
      of the acceptable range when processing reports on the calendar
      object resource.  In the absence of this property, the client can
      assume any valid iCalendar date may be used at least up to the
      CALDAV:max-date-time value, if that is defined.

   Definition:

         <!ELEMENT min-date-time (#PCDATA)>
         PCDATA value: an iCalendar format DATE-TIME value in UTC

   Example:

         <C:min-date-time xmlns:C="urn:ietf:params:xml:ns:caldav"
         >19000101T000000Z</C:min-date-time>

5.2.7.  CALDAV:max-date-time Property

   Name:  max-date-time

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a DATE-TIME value indicating the latest date and
      time (in UTC) that the server is willing to accept for any DATE or
      DATE-TIME value in a calendar object resource stored in a calendar
      collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:max-date-time is used to specify an
      iCalendar DATE-TIME value in UTC that indicates the inclusive
      latest date that the server is willing to accept for any date or
      time value in a calendar object resource stored in a calendar
      collection.  Any attempt to store a calendar object resource using
      a DATE or DATE-TIME value later than this value MUST result in an
      error, with the CALDAV:max-date-time precondition
      (Section 5.3.2.1) being violated.  Note that servers MUST accept
      recurring components that specify instances beyond this limit,
      provided none of those instances have been overridden.  In that
      case, the server MAY simply ignore those instances outside of the
      acceptable range when processing reports on the calendar object
      resource.  In the absence of this property, the client can assume
      any valid iCalendar date may be used at least down to the CALDAV:
      min-date-time value, if that is defined.

   Definition:

         <!ELEMENT max-date-time (#PCDATA)>
         PCDATA value: an iCalendar format DATE-TIME value in UTC

   Example:

         <C:max-date-time xmlns:C="urn:ietf:params:xml:ns:caldav"
         >20491231T235959Z</C:max-date-time>

5.2.8.  CALDAV:max-instances Property

   Name:  max-instances

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a numeric value indicating the maximum number of
      recurrence instances that a calendar object resource stored in a
      calendar collection can generate.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be
      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:max-instances is used to specify a numeric
      value that indicates the maximum number of recurrence instances
      that a calendar object resource stored in a calendar collection
      can generate.  Any attempt to store a calendar object resource
      with a recurrence pattern that generates more instances than this
      value MUST result in an error, with the CALDAV:max-instances
      precondition (Section 5.3.2.1) being violated.  In the absence of
      this property, the client can assume that the server has no limits
      on the number of recurrence instances it can handle or expand.

   Definition:

         <!ELEMENT max-instances (#PCDATA)>
         PCDATA value: a numeric value (integer greater than zero)

   Example:

         <C:max-instances xmlns:C="urn:ietf:params:xml:ns:caldav"
         >100</C:max-instances>

5.2.9.  CALDAV:max-attendees-per-instance Property

   Name:  max-attendees-per-instance

   Namespace:  urn:ietf:params:xml:ns:caldav

   Purpose:  Provides a numeric value indicating the maximum number of
      ATTENDEE properties in any instance of a calendar object resource
      stored in a calendar collection.

   Conformance:  This property MAY be defined on any calendar
      collection.  If defined, it MUST be protected and SHOULD NOT be

      returned by a PROPFIND DAV:allprop request (as defined in Section
      12.14.1 of [RFC2518]).

   Description:  The CALDAV:max-attendees-per-instance is used to
      specify a numeric value that indicates the maximum number of
      iCalendar ATTENDEE properties on any one instance of a calendar
      object resource stored in a calendar collection.  Any attempt to
      store a calendar object resource with more ATTENDEE properties per
      instance than this value MUST result in an error, with the CALDAV:
      max-attendees-per-instance precondition (Section 5.3.2.1) being
      violated.  In the absence of this property, the client can assume
      that the server can handle any number of ATTENDEE properties in a
      calendar component.

   Definition:

         <!ELEMENT max-attendees-per-instance (#PCDATA)>
         PCDATA value: a numeric value (integer greater than zero)

   Example:

         <C:max-attendees-per-instance
              xmlns:C="urn:ietf:params:xml:ns:caldav"
         >25</C:max-attendees-per-instance>

5.2.10.  Additional Precondition for PROPPATCH

   This specification requires an additional Precondition for the
   PROPPATCH method.  The precondition is:

      (CALDAV:valid-calendar-data): The time zone specified in CALDAV:
      calendar-timezone property MUST be a valid iCalendar object
      containing a single valid VTIMEZONE component.

5.3.  Creating Resources

   Calendar collections and calendar object resources may be created by
   either a CalDAV client or by the CalDAV server.  This specification
   defines restrictions and a data model that both clients and servers
   MUST adhere to when manipulating such calendar data.

5.3.1.  MKCALENDAR Method

   An HTTP request using the MKCALENDAR method creates a new calendar
   collection resource.  A server MAY restrict calendar collection
   creation to particular collections.

   Support for MKCALENDAR on the server is only RECOMMENDED and not
   REQUIRED because some calendar stores only support one calendar per
   user (or principal), and those are typically pre-created for each
   account.  However, servers and clients are strongly encouraged to
   support MKCALENDAR whenever possible to allow users to create
   multiple calendar collections to help organize their data better.

   Clients SHOULD use the DAV:displayname property for a human-readable
   name of the calendar.  Clients can either specify the value of the
   DAV:displayname property in the request body of the MKCALENDAR
   request, or alternatively issue a PROPPATCH request to change the
   DAV:displayname property to the appropriate value immediately after
   issuing the MKCALENDAR request.  Clients SHOULD NOT set the DAV:
   displayname property to be the same as any other calendar collection
   at the same URI "level".  When displaying calendar collections to
   users, clients SHOULD check the DAV:displayname property and use that
   value as the name of the calendar.  In the event that the DAV:
   displayname property is empty, the client MAY use the last part of
   the calendar collection URI as the name; however, that path segment
   may be "opaque" and not represent any meaningful human-readable text.

   If a MKCALENDAR request fails, the server state preceding the request
   MUST be restored.

   Marshalling:
      If a request body is included, it MUST be a CALDAV:mkcalendar XML
      element.  Instruction processing MUST occur in the order
      instructions are received (i.e., from top to bottom).
      Instructions MUST either all be executed or none executed.  Thus,
      if any error occurs during processing, all executed instructions
      MUST be undone and a proper error result returned.  Instruction
      processing details can be found in the definition of the DAV:set
      instruction in Section 12.13.2 of [RFC2518].

         <!ELEMENT mkcalendar (DAV:set)>

      If a response body for a successful request is included, it MUST
      be a CALDAV:mkcalendar-response XML element.

         <!ELEMENT mkcalendar-response ANY>

      The response MUST include a Cache-Control:no-cache header.

   Preconditions:

      (DAV:resource-must-be-null): A resource MUST NOT exist at the
      Request-URI;

      (CALDAV:calendar-collection-location-ok): The Request-URI MUST
      identify a location where a calendar collection can be created;

      (CALDAV:valid-calendar-data): The time zone specified in the
      CALDAV:calendar-timezone property MUST be a valid iCalendar object
      containing a single valid VTIMEZONE component;

            (DAV:need-privileges): The DAV:bind privilege MUST be granted to 
      the current user on the parent collection of the Request-URI.
EID 1002 (Verified) is as follows:

Section: 5.3.1

Original Text:

      (DAV:needs-privilege): The DAV:bind privilege MUST be granted to
               ^          ^
      the current user on the parent collection of the Request-URI.

Corrected Text:

      (DAV:need-privileges): The DAV:bind privilege MUST be granted to
               ^         ^
      the current user on the parent collection of the Request-URI.
Notes:
As per RFC 3744.
Postconditions: (CALDAV:initialize-calendar-collection): A new calendar collection exists at the Request-URI. The DAV:resourcetype of the calendar collection MUST contain both DAV:collection and CALDAV:calendar XML elements. 5.3.1.1. Status Codes The following are examples of response codes one would expect to get in a response to a MKCALENDAR request. Note that this list is by no means exhaustive. 201 (Created) - The calendar collection resource was created in its entirety; 207 (Multi-Status) - The calendar collection resource was not created since one or more DAV:set instructions specified in the request body could not be processed successfully. The following are examples of response codes one would expect to be used in a 207 (Multi-Status) response in this situation: 403 (Forbidden) - The client, for reasons the server chooses not to specify, cannot alter one of the properties; 409 (Conflict) - The client has provided a value whose semantics are not appropriate for the property. This includes trying to set read-only properties; 424 (Failed Dependency) - The DAV:set instruction on the specified resource would have succeeded if it were not for the failure of another DAV:set instruction specified in the request body; 423 (Locked) - The specified resource is locked and the client either is not a lock owner or the lock type requires a lock token to be submitted and the client did not submit it; and 507 (Insufficient Storage) - The server did not have sufficient space to record the property; 403 (Forbidden) - This indicates at least one of two conditions: 1) the server does not allow the creation of calendar collections at the given location in its namespace, or 2) the parent collection of the Request-URI exists but cannot accept members; 409 (Conflict) - A collection cannot be made at the Request-URI until one or more intermediate collections have been created; 415 (Unsupported Media Type) - The server does not support the request type of the body; and 507 (Insufficient Storage) - The resource does not have sufficient space to record the state of the resource after the execution of this method. 5.3.1.2. Example: Successful MKCALENDAR Request This example creates a calendar collection called /home/lisa/ calendars/events/ on the server cal.example.com with specific values for the properties DAV:displayname, CALDAV:calendar-description, CALDAV:supported-calendar-component-set, and CALDAV:calendar- timezone. >> Request << MKCALENDAR /home/lisa/calendars/events/ HTTP/1.1 Host: cal.example.com Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:mkcalendar xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:set> <D:prop> <D:displayname>Lisa's Events</D:displayname> <C:calendar-description xml:lang="en" >Calendar restricted to events.</C:calendar-description> <C:supported-calendar-component-set> <C:comp name="VEVENT"/> </C:supported-calendar-component-set> <C:calendar-timezone><![CDATA[BEGIN:VCALENDAR PRODID:-//Example Corp.//CalDAV Client//EN VERSION:2.0 BEGIN:VTIMEZONE TZID:US-Eastern LAST-MODIFIED:19870101T000000Z BEGIN:STANDARD DTSTART:19671029T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZOFFSETFROM:-0400 TZOFFSETTO:-0500 TZNAME:Eastern Standard Time (US & Canada) END:STANDARD BEGIN:DAYLIGHT DTSTART:19870405T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZOFFSETFROM:-0500 TZOFFSETTO:-0400 TZNAME:Eastern Daylight Time (US & Canada) END:DAYLIGHT END:VTIMEZONE END:VCALENDAR ]]></C:calendar-timezone> </D:prop> </D:set> </C:mkcalendar> >> Response << HTTP/1.1 201 Created Cache-Control: no-cache Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Length: 0 5.3.2. Creating Calendar Object Resources Clients populate calendar collections with calendar object resources. The URL for each calendar object resource is entirely arbitrary and does not need to bear a specific relationship to the calendar object resource's iCalendar properties or other metadata. New calendar object resources MUST be created with a PUT request targeted at an unmapped URI. A PUT request targeted at a mapped URI updates an existing calendar object resource. When servers create new resources, it's not hard for the server to choose an unmapped URI. It's slightly tougher for clients, because a client might not want to examine all resources in the collection and might not want to lock the entire collection to ensure that a new resource isn't created with a name collision. However, there is an HTTP feature to mitigate this. If the client intends to create a new non-collection resource, such as a new VEVENT, the client SHOULD use the HTTP request header "If-None-Match: *" on the PUT request. The Request-URI on the PUT request MUST include the target collection, where the resource is to be created, plus the name of the resource in the last path segment. The "If-None-Match: *" request header ensures that the client will not inadvertently overwrite an existing resource if the last path segment turned out to already be used. >> Request << PUT /home/lisa/calendars/events/qwue23489.ics HTTP/1.1 If-None-Match: * Host: cal.example.com Content-Type: text/calendar Content-Length: xxxx BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VEVENT UID:20010712T182145Z-123401@example.com DTSTAMP:20060712T182145Z DTSTART:20060714T170000Z DTEND:20060715T040000Z SUMMARY:Bastille Day Party END:VEVENT END:VCALENDAR >> Response << HTTP/1.1 201 Created Content-Length: 0 Date: Sat, 11 Nov 2006 09:32:12 GMT ETag: "123456789-000-111" The request to change an existing event is the same, but with a specific ETag in the "If-Match" header, rather than the "If-None- Match" header. As indicated in Section 3.10 of [RFC2445], the URL of calendar object resources containing (an arbitrary set of) calendaring and scheduling information may be suffixed by ".ics", and the URL of calendar object resources containing free or busy time information may be suffixed by ".ifb". 5.3.2.1. Additional Preconditions for PUT, COPY, and MOVE This specification creates additional Preconditions for PUT, COPY, and MOVE methods. These preconditions apply when a PUT operation of a calendar object resource into a calendar collection occurs, or when a COPY or MOVE operation of a calendar object resource into a calendar collection occurs, or when a COPY or MOVE operation occurs on a calendar collection. The new preconditions are: (CALDAV:supported-calendar-data): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST be a supported media type (i.e., iCalendar) for calendar object resources; (CALDAV:valid-calendar-data): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST be valid data for the media type being specified (i.e., MUST contain valid iCalendar data); (CALDAV:valid-calendar-object-resource): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST obey all restrictions specified in Section 4.1 (e.g., calendar object resources MUST NOT contain more than one type of calendar component, calendar object resources MUST NOT specify the iCalendar METHOD property, etc.); (CALDAV:supported-calendar-component): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST contain a type of calendar component that is supported in the targeted calendar collection; (CALDAV:no-uid-conflict): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST NOT specify an iCalendar UID property value already in use in the targeted calendar collection or overwrite an existing calendar object resource with one that has a different UID property value. Servers SHOULD report the URL of the resource that is already making use of the same UID property value in the DAV:href element; <!ELEMENT no-uid-conflict (DAV:href)> (CALDAV:calendar-collection-location-ok): In a COPY or MOVE request, when the Request-URI is a calendar collection, the Destination-URI MUST identify a location where a calendar collection can be created; (CALDAV:max-resource-size): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST have an octet size less than or equal to the value of the CALDAV:max-resource- size property value (Section 5.2.5) on the calendar collection where the resource will be stored; (CALDAV:min-date-time): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST have all of its iCalendar DATE or DATE-TIME property values (for each recurring instance) greater than or equal to the value of the CALDAV:min- date-time property value (Section 5.2.6) on the calendar collection where the resource will be stored; (CALDAV:max-date-time): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST have all of its iCalendar DATE or DATE-TIME property values (for each recurring instance) less than the value of the CALDAV:max-date-time property value (Section 5.2.7) on the calendar collection where the resource will be stored; (CALDAV:max-instances): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST generate a number of recurring instances less than or equal to the value of the CALDAV: max-instances property value (Section 5.2.8) on the calendar collection where the resource will be stored; (CALDAV:max-attendees-per-instance): The resource submitted in the PUT request, or targeted by a COPY or MOVE request, MUST have a number of ATTENDEE properties on any one instance less than or equal to the value of the CALDAV:max-attendees-per-instance property value (Section 5.2.9) on the calendar collection where the resource will be stored; 5.3.3. Non-Standard Components, Properties, and Parameters iCalendar provides a "standard mechanism for doing non-standard things". This extension support allows implementers to make use of non-standard components, properties, and parameters whose names are prefixed with the text "X-". Servers MUST support the use of non-standard components, properties, and parameters in calendar object resources stored via the PUT method. Servers may need to enforce rules for their own "private" components, properties, or parameters, so servers MAY reject any attempt by the client to change those or use values for those outside of any restrictions the server may have. Servers SHOULD ensure that any "private" components, properties, or parameters it uses follow the convention of including a vendor id in the "X-" name, as described in Section 4.2 of [RFC2445], e.g., "X-ABC-PRIVATE". 5.3.4. Calendar Object Resource Entity Tag The DAV:getetag property MUST be defined and set to a strong entity tag on all calendar object resources. A response to a GET request targeted at a calendar object resource MUST contain an ETag response header field indicating the current value of the strong entity tag of the calendar object resource. Servers SHOULD return a strong entity tag (ETag header) in a PUT response when the stored calendar object resource is equivalent by octet equality to the calendar object resource submitted in the body of the PUT request. This allows clients to reliably use the returned strong entity tag for data synchronization purposes. For instance, the client can do a PROPFIND request on the stored calendar object resource and have the DAV:getetag property returned, and compare that value with the strong entity tag it received on the PUT response, and know that if they are equal, then the calendar object resource on the server has not been changed. In the case where the data stored by a server as a result of a PUT request is not equivalent by octet equality to the submitted calendar object resource, the behavior of the ETag response header is not specified here, with the exception that a strong entity tag MUST NOT be returned in the response. As a result, clients may need to retrieve the modified calendar object resource (and ETag) as a basis for further changes, rather than use the calendar object resource it had sent with the PUT request. 6. Calendaring Access Control 6.1. Calendaring Privilege CalDAV servers MUST support and adhere to the requirements of WebDAV ACL [RFC3744]. WebDAV ACL provides a framework for an extensible set of privileges that can be applied to WebDAV collections and ordinary resources. CalDAV servers MUST also support the calendaring privilege defined in this section. 6.1.1. CALDAV:read-free-busy Privilege Calendar users often wish to allow other users to see their busy time information, without viewing the other details of the calendar components (e.g., location, summary, attendees). This allows a significant amount of privacy while still allowing other users to schedule meetings at times when the user is likely to be free. The CALDAV:read-free-busy privilege controls which calendar collections, regular collections, and calendar object resources are examined when a CALDAV:free-busy-query REPORT request is processed (see Section 7.10). This privilege can be granted on calendar collections, regular collections, or calendar object resources. Servers MUST support this privilege on all calendar collections, regular collections, and calendar object resources. <!ELEMENT read-free-busy EMPTY> The CALDAV:read-free-busy privilege MUST be aggregated in the DAV: read privilege. Servers MUST allow the CALDAV:read-free-busy to be granted without the DAV:read privilege being granted. Clients should note that when only the CALDAV:read-free-busy privilege has been granted on a resource, access to GET, HEAD, OPTIONS, and PROPFIND on the resource is not implied (those operations are governed by the DAV:read privilege). 6.2. Additional Principal Property This section defines an additional property for WebDAV principal resources, as defined in [RFC3744]. 6.2.1. CALDAV:calendar-home-set Property Name: calendar-home-set Namespace: urn:ietf:params:xml:ns:caldav Purpose: Identifies the URL of any WebDAV collections that contain calendar collections owned by the associated principal resource. Conformance: This property SHOULD be defined on a principal resource. If defined, it MAY be protected and SHOULD NOT be returned by a PROPFIND DAV:allprop request (as defined in Section 12.14.1 of [RFC2518]). Description: The CALDAV:calendar-home-set property is meant to allow users to easily find the calendar collections owned by the principal. Typically, users will group all the calendar collections that they own under a common collection. This property specifies the URL of collections that are either calendar collections or ordinary collections that have child or descendant calendar collections owned by the principal. Definition: <!ELEMENT calendar-home-set (DAV:href*)> Example: <C:calendar-home-set xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:href>http://cal.example.com/home/bernard/calendars/</D:href> </C:calendar-home-set> 7. Calendaring Reports This section defines the reports that CalDAV servers MUST support on calendar collections and calendar object resources. CalDAV servers MUST advertise support for these reports on all calendar collections and calendar object resources with the DAV: supported-report-set property, defined in Section 3.1.5 of [RFC3253]. CalDAV servers MAY also advertise support for these reports on ordinary collections. Some of these reports allow calendar data (from possibly multiple resources) to be returned. 7.1. REPORT Method The REPORT method (defined in Section 3.6 of [RFC3253]) provides an extensible mechanism for obtaining information about one or more resources. Unlike the PROPFIND method, which returns the value of one or more named properties, the REPORT method can involve more complex processing. REPORT is valuable in cases where the server has access to all of the information needed to perform the complex request (such as a query), and where it would require multiple requests for the client to retrieve the information needed to perform the same request. CalDAV servers MUST support the DAV:expand-property REPORT defined in Section 3.8 of [RFC3253]. 7.2. Ordinary Collections Servers MAY support the reports defined in this document on ordinary collections (collections that are not calendar collections), in addition to calendar collections or calendar object resources. In computing responses to the reports on ordinary collections, servers MUST only consider calendar object resources contained in calendar collections that are targeted by the REPORT request, based on the value of the Depth request header. 7.3. Date and Floating Time iCalendar provides a way to specify DATE and DATE-TIME values that are not bound to any time zone in particular, hereafter called "floating date" and "floating time", respectively. These values are used to represent the same day, hour, minute, and second value, regardless of which time zone is being observed. For instance, the DATE value "20051111", represents November 11, 2005 in no specific time zone, while the DATE-TIME value "20051111T111100" represents November 11, 2005, at 11:11 A.M. in no specific time zone. CalDAV servers may need to convert "floating date" and "floating time" values in date with UTC time values in the processing of calendaring REPORT requests. For the CALDAV:calendar-query REPORT, CalDAV servers MUST rely on the value of the CALDAV:timezone XML element, if specified as part of the request body, to perform the proper conversion of "floating date" and "floating time" values to date with UTC time values. If the CALDAV: timezone XML element is not specified in the request body, CalDAV servers MUST rely on the value of the CALDAV:calendar-timezone property, if defined, or else the CalDAV servers MAY rely on the time zone of their choice. For the CALDAV:free-busy-query REPORT, CalDAV servers MUST rely on the value of the CALDAV:calendar-timezone property, if defined, to compute the proper FREEBUSY time period value as date with UTC time for calendar components scheduled with "floating date" or "floating time". If the CALDAV:calendar-timezone property is not defined, CalDAV servers MAY rely on the time zone of their choice. 7.4. Time Range Filtering Some of the reports defined in this section can include a time range filter that is used to restrict the set of calendar object resources returned to just those that overlap the specified time range. The time range filter can be applied to a calendar component as a whole, or to specific calendar component properties with DATE or DATE-TIME value types. To determine whether a calendar object resource matches the time range filter element, the start and end times for the targeted component or property are determined and then compared to the requested time range. If there is an overlap with the requested time range, then the calendar object resource matches the filter element. The rules defined in [RFC2445] for determining the actual start and end times of calendar components MUST be used, and these are fully enumerated in Section 9.9 of this document. When such time range filtering is used, special consideration must be given to recurring calendar components, such as VEVENT and VTODO. The server MUST expand recurring components to determine whether any recurrence instances overlap the specified time range. If one or more recurrence instances overlap the time range, then the calendar object resource matches the filter element. 7.5. Searching Text: Collations Some of the reports defined in this section do text matches of character strings provided by the client and are compared to stored calendar data. Since iCalendar data is, by default, encoded in the UTF-8 charset and may include characters outside the US-ASCII charset range in some property and parameter values, there is a need to ensure that text matching follows well-defined rules. To deal with this, this specification makes use of the IANA Collation Registry defined in [RFC4790] to specify collations that may be used to carry out the text comparison operations with a well-defined rule. The comparisons used in CalDAV are all "substring" matches, as per [RFC4790], Section 4.2. Collations supported by the server MUST support "substring" match operations. CalDAV servers are REQUIRED to support the "i;ascii-casemap" and "i;octet" collations, as described in [RFC4790], and MAY support other collations. Servers MUST advertise the set of collations that they support via the CALDAV:supported-collation-set property defined on any resource that supports reports that use collations. Clients MUST only use collations from the list advertised by the server. In the absence of a collation explicitly specified by the client, or if the client specifies the "default" collation identifier (as defined in [RFC4790], Section 3.1), the server MUST default to using "i;ascii-casemap" as the collation. Wildcards (as defined in [RFC4790], Section 3.2) MUST NOT be used in the collation identifier. If the client chooses a collation not supported by the server, the server MUST respond with a CALDAV:supported-collation precondition error response. 7.5.1. CALDAV:supported-collation-set Property Name: supported-collation-set Namespace: urn:ietf:params:xml:ns:caldav Purpose: Identifies the set of collations supported by the server for text matching operations. Conformance: This property MUST be defined on any resource that supports a report that does text matching. If defined, it MUST be protected and SHOULD NOT be returned by a PROPFIND DAV:allprop request (as defined in Section 12.14.1 of [RFC2518]). Description: The CALDAV:supported-collation-set property contains zero or more CALDAV:supported-collation elements, which specify the collection identifiers of the collations supported by the server. Definition: <!ELEMENT supported-collation-set (supported-collation*)> <!ELEMENT supported-collation (#PCDATA)> Example: <C:supported-collation-set xmlns:C="urn:ietf:params:xml:ns:caldav"> <C:supported-collation>i;ascii-casemap</C:supported-collation> <C:supported-collation>i;octet</C:supported-collation> </C:supported-collation-set> 7.6. Partial Retrieval Some calendaring reports defined in this document allow partial retrieval of calendar object resources. A CalDAV client can specify what information to return in the body of a calendaring REPORT request. A CalDAV client can request particular WebDAV property values, all WebDAV property values, or a list of the names of the resource's WebDAV properties. A CalDAV client can also request calendar data to be returned and specify whether all calendar components and properties should be returned, or only particular ones. See CALDAV: calendar-data in Section 9.6. By default, the returned calendar data will include the component that defines the recurrence set, referred to as the "master component", as well as the components that define exceptions to the recurrence set, referred to as the "overridden components". A CalDAV client that is only interested in the recurrence instances that overlap a specified time range can request to receive only the "master component", along with the "overridden components" that impact the specified time range, and thus, limit the data returned by the server (see CALDAV:limit-recurrence-set in Section 9.6.6). An overridden component impacts a time range if its current start and end times overlap the time range, or if the original start and end times -- the ones that would have been used if the instance were not overridden -- overlap the time range, or if it affects other instances that overlap the time range. A CalDAV client with no support for recurrence properties (i.e., EXDATE, EXRULE, RDATE, and RRULE) and possibly VTIMEZONE components, or a client unwilling to perform recurrence expansion because of limited processing capability, can request to receive only the recurrence instances that overlap a specified time range as separate calendar components that each define exactly one recurrence instance (see CALDAV:expand in Section 9.6.5.) Finally, in the case of VFREEBUSY components, a CalDAV client can request to receive only the FREEBUSY property values that overlap a specified time range (see CALDAV:limit-freebusy-set in Section 9.6.7.) 7.7. Non-Standard Components, Properties, and Parameters Servers MUST support the use of non-standard component, property, or parameter names in the CALDAV:calendar-data XML element in calendaring REPORT requests to allow clients to request that non- standard components, properties, and parameters be returned in the calendar data provided in the response. Servers MAY support the use of non-standard component, property, or parameter names in the CALDAV:comp-filter, CALDAV:prop-filter, and CALDAV:param-filter XML elements specified in the CALDAV:filter XML element of calendaring REPORT requests. Servers MUST fail with the CALDAV:supported-filter precondition if a calendaring REPORT request uses a CALDAV:comp-filter, CALDAV:prop- filter, or CALDAV:param-filter XML element that makes reference to a non-standard component, property, or parameter name on which the server does not support queries. 7.8. CALDAV:calendar-query REPORT The CALDAV:calendar-query REPORT performs a search for all calendar object resources that match a specified filter. The response of this report will contain all the WebDAV properties and calendar object resource data specified in the request. In the case of the CALDAV: calendar-data XML element, one can explicitly specify the calendar components and properties that should be returned in the calendar object resource data that matches the filter. The format of this report is modeled on the PROPFIND method. The request and response bodies of the CALDAV:calendar-query REPORT use XML elements that are also used by PROPFIND. In particular, the request can include XML elements to request WebDAV properties to be returned. When that occurs, the response should follow the same behavior as PROPFIND with respect to the DAV:multistatus response elements used to return specific property results. For instance, a request to retrieve the value of a property that does not exist is an error and MUST be noted with a response XML element that contains a 404 (Not Found) status value. Support for the CALDAV:calendar-query REPORT is REQUIRED. Marshalling: The request body MUST be a CALDAV:calendar-query XML element, as defined in Section 9.5. The request MAY include a Depth header. If no Depth header is included, Depth:0 is assumed. The response body for a successful request MUST be a DAV: multistatus XML element (i.e., the response uses the same format as the response for PROPFIND). In the case where there are no response elements, the returned DAV:multistatus XML element is empty. The response body for a successful CALDAV:calendar-query REPORT request MUST contain a DAV:response element for each iCalendar object that matched the search filter. Calendar data is being returned in the CALDAV:calendar-data XML element inside the DAV: propstat XML element. Preconditions: (CALDAV:supported-calendar-data): The attributes "content-type" and "version" of the CALDAV:calendar-data XML element (see Section 9.6) specify a media type supported by the server for calendar object resources. (CALDAV:valid-filter): The CALDAV:filter XML element (see Section 9.7) specified in the REPORT request MUST be valid. For instance, a CALDAV:filter cannot nest a <C:comp name="VEVENT"> element in a <C:comp name="VTODO"> element, and a CALDAV:filter cannot nest a <C:time-range start="..." end="..."> element in a <C:prop name="SUMMARY"> element. (CALDAV:supported-filter): The CALDAV:comp-filter (see Section 9.7.1), CALDAV:prop-filter (see Section 9.7.2), and CALDAV:param-filter (see Section 9.7.3) XML elements used in the CALDAV:filter XML element (see Section 9.7) in the REPORT request only make reference to components, properties, and parameters for which queries are supported by the server, i.e., if the CALDAV: filter element attempts to reference an unsupported component, property, or parameter, this precondition is violated. Servers SHOULD report the CALDAV:comp-filter, CALDAV:prop-filter, or CALDAV:param-filter for which it does not provide support. <!ELEMENT supported-filter (comp-filter*, prop-filter*, param-filter*)> (CALDAV:valid-calendar-data): The time zone specified in the REPORT request MUST be a valid iCalendar object containing a single valid VTIMEZONE component. (CALDAV:min-date-time): Any XML element specifying a range of time MUST have its start or end DATE or DATE-TIME values greater than or equal to the value of the CALDAV:min-date-time property value (Section 5.2.6) on the calendar collections being targeted by the REPORT request; (CALDAV:max-date-time): Any XML element specifying a range of time MUST have its start or end DATE or DATE-TIME values less than or equal to the value of the CALDAV:max-date-time property value (Section 5.2.7) on the calendar collections being targeted by the REPORT request; (CALDAV:supported-collation): Any XML attribute specifying a collation MUST specify a collation supported by the server as described in Section 7.5. Postconditions: (DAV:number-of-matches-within-limits): The number of matching calendar object resources must fall within server-specific, predefined limits. For example, this condition might be triggered if a search specification would cause the return of an extremely large number of responses. 7.8.1. Example: Partial Retrieval of Events by Time Range In this example, the client requests the server to return specific components and properties of the VEVENT components that overlap the time range from January 4, 2006, at 00:00:00 A.M. UTC to January 5, 2006, at 00:00:00 A.M. UTC. In addition, the DAV:getetag property is also requested and returned as part of the response. Note that the first calendar object returned is a recurring event whose first instance lies outside the requested time range, but whose third instance does overlap the time range. Note that due to the CALDAV: calendar-data element restrictions, the DTSTAMP property in VEVENT components has not been returned, and the only property returned in the VCALENDAR object is VERSION. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <D:getetag/> <C:calendar-data> <C:comp name="VCALENDAR"> <C:prop name="VERSION"/> <C:comp name="VEVENT"> <C:prop name="SUMMARY"/> <C:prop name="UID"/> <C:prop name="DTSTART"/> <C:prop name="DTEND"/> <C:prop name="DURATION"/> <C:prop name="RRULE"/> <C:prop name="RDATE"/> <C:prop name="EXRULE"/> <C:prop name="EXDATE"/> <C:prop name="RECURRENCE-ID"/> </C:comp> <C:comp name="VTIMEZONE"/> </C:comp> </C:calendar-data> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:time-range start="20060104T000000Z" end="20060105T000000Z"/> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd2.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd2"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=US/Eastern:20060102T120000 DURATION:PT1H RRULE:FREQ=DAILY;COUNT=5 SUMMARY:Event #2 UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTART;TZID=US/Eastern:20060104T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060104T120000 SUMMARY:Event #2 bis UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTART;TZID=US/Eastern:20060106T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060106T120000 SUMMARY:Event #2 bis bis UID:00959BC664CA650E933C892C@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern
EID 4153 (Verified) is as follows:

Section: 7.8.1

Original Text:

       <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd3"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTIMEZONE
   LAST-MODIFIED:20040110T032845Z
   TZID:US/Eastern

Corrected Text:

       <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd3"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   BEGIN:VTIMEZONE
   LAST-MODIFIED:20040110T032845Z
   TZID:US/Eastern
Notes:
Remove the PRODID property in abcd3.ics, which was not selected by C:calendar-date/C:comp[@name="VCALENDAR"]/*
BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.2. Example: Partial Retrieval of Recurring Events In this example, the client requests the server to return VEVENT components that overlap the time range from January 3, 2006, at 00: 00:00 A.M. UTC to January 5, 2006, at 00:00:00 A.M. UTC. Use of the CALDAV:limit-recurrence-set element causes the server to only return overridden recurrence components that overlap the time range specified in that element or that affect other instances that overlap the time range (e.g., in the case of a THISANDFUTURE behavior). In this example, the first overridden component in the matching resource is returned, but the second one is not. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <C:calendar-data> <C:limit-recurrence-set start="20060103T000000Z" end="20060105T000000Z"/> </C:calendar-data> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:time-range start="20060103T000000Z" end="20060105T000000Z"/> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd2.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd2"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060102T120000 DURATION:PT1H RRULE:FREQ=DAILY;COUNT=5 SUMMARY:Event #2 UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060104T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060104T120000 SUMMARY:Event #2 bis UID:00959BC664CA650E933C892C@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.3. Example: Expanded Retrieval of Recurring Events In this example, the client requests the server to return VEVENT components that overlap the time range from January 2, 2006, at 00: 00:00 A.M. UTC to January 5, 2006, at 00:00:00 A.M. UTC and to return recurring calendar components expanded into individual recurrence instance calendar components. Use of the CALDAV:expand element causes the server to only return overridden recurrence instances that overlap the time range specified in that element. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <C:calendar-data> <C:expand start="20060103T000000Z" end="20060105T000000Z"/> </C:calendar-data> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:time-range start="20060103T000000Z" end="20060105T000000Z"/> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd2.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd2"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART:20060103T170000Z DURATION:PT1H RECURRENCE-ID:20060103T170000Z SUMMARY:Event #2 UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART:20060104T190000Z DURATION:PT1H RECURRENCE-ID:20060104T170000Z SUMMARY:Event #2 bis UID:00959BC664CA650E933C892C@example.com END:VEVENT END:VCALENDAR </C:calendar-data>
EID 4155 (Verified) is as follows:

Section: 7.8.3

Original Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART:20060103T170000
   DURATION:PT1H
   RECURRENCE-ID:20060103T170000
   SUMMARY:Event #2
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART:20060104T190000
   DURATION:PT1H
   RECURRENCE-ID:20060104T170000
   SUMMARY:Event #2 bis
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART:20060103T170000Z
   DURATION:PT1H
   RECURRENCE-ID:20060103T170000Z
   SUMMARY:Event #2
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART:20060104T190000Z
   DURATION:PT1H
   RECURRENCE-ID:20060104T170000Z
   SUMMARY:Event #2 bis
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   END:VCALENDAR
   </C:calendar-data>
Notes:
9.6.5 says:
Date and local
time with reference to time zone information MUST be converted
into date with UTC time.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART:20060104T150000Z DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR </C:calendar-data>
EID 4156 (Verified) is as follows:

Section: 7.8.3

Original Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VEVENT
   ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com
   ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com
   DTSTAMP:20060206T001220Z
   DTSTART:20060104T150000
   DURATION:PT1H
   LAST-MODIFIED:20060206T001330Z
   ORGANIZER:mailto:cyrus@example.com
   SEQUENCE:1
   STATUS:TENTATIVE
   SUMMARY:Event #3
   UID:DC6C50A017428C5216A2F1CD@example.com
   X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com
   END:VEVENT
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VEVENT
   ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com
   ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com
   DTSTAMP:20060206T001220Z
   DTSTART:20060104T150000Z
   DURATION:PT1H
   LAST-MODIFIED:20060206T001330Z
   ORGANIZER:mailto:cyrus@example.com
   SEQUENCE:1
   STATUS:TENTATIVE
   SUMMARY:Event #3
   UID:DC6C50A017428C5216A2F1CD@example.com
   X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com
   END:VEVENT
   END:VCALENDAR
   </C:calendar-data>
Notes:
9.6.5 says:
Date and local
time with reference to time zone information MUST be converted
into date with UTC time.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.4. Example: Partial Retrieval of Stored Free Busy Components In this example, the client requests the server to return the VFREEBUSY components that have free busy information that overlap the time range from January 2, 2006, at 00:00:00 A.M. UTC (inclusively) to January 3, 2006, at 00:00:00 A.M. UTC (exclusively). Use of the CALDAV:limit-freebusy-set element causes the server to only return the FREEBUSY property values that overlap the time range specified in that element. Note that this is not an example of discovering when the calendar owner is busy. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <C:calendar-data> <C:limit-freebusy-set start="20060102T000000Z" end="20060103T000000Z"/> </C:calendar-data> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VFREEBUSY"> <C:time-range start="20060102T000000Z" end="20060103T000000Z"/> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd8.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd8"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VFREEBUSY ORGANIZER;CN="Bernard Desruisseaux":mailto:bernard@example.com UID:76ef34-54a3d2@example.com DTSTAMP:20050530T123421Z DTSTART:20060101T000000Z DTEND:20060108T000000Z FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060102T100000Z/20060102T120000Z END:VFREEBUSY END:VCALENDAR </C:calendar-data>
EID 4157 (Verified) is as follows:

Section: 7.8.4

Original Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VFREEBUSY
   ORGANIZER;CN="Bernard Desruisseaux":mailto:bernard@example.com
   UID:76ef34-54a3d2@example.com
   DTSTAMP:20050530T123421Z
   DTSTART:20060101T100000Z
   DTEND:20060108T100000Z
   FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060102T100000Z/20060102T120000Z
   END:VFREEBUSY
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VFREEBUSY
   ORGANIZER;CN="Bernard Desruisseaux":mailto:bernard@example.com
   UID:76ef34-54a3d2@example.com
   DTSTAMP:20050530T123421Z
   DTSTART:20060101T000000Z
   DTEND:20060108T000000Z
   FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060102T100000Z/20060102T120000Z
   END:VFREEBUSY
   END:VCALENDAR
   </C:calendar-data>
Notes:
Typo in DTSTART, DTEND property.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.5. Example: Retrieval of To-Dos by Alarm Time Range
EID 4154 (Verified) is as follows:

Section: 7.8.5

Original Text:

   <D:multistatus xmlns:D="DAV:"
                  xmlns:C="urn:ietf:params:xml:ns:caldav">
     <D:response>
       <D:href>http://cal.example.com/bernard/work/abcd4.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR

Corrected Text:

   <D:multistatus xmlns:D="DAV:"
                  xmlns:C="urn:ietf:params:xml:ns:caldav">
     <D:response>
       <D:href>http://cal.example.com/bernard/work/abcd5.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
Notes:
Typo in D:href
In this example, the client requests the server to return the VTODO components that have an alarm trigger scheduled in the specified time range. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VTODO"> <C:comp-filter name="VALARM"> <C:time-range start="20060106T100000Z" end="20060107T100000Z"/> </C:comp-filter> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd5.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd5"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR
EID 4158 (Verified) is as follows:

Section: 7.8.5

Original Text:

     <D:response>
       <D:href>http://cal.example.com/bernard/work/abcd4.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd4"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR

Corrected Text:

     <D:response>
       <D:href>http://cal.example.com/bernard/work/abcd5.ics</D:href>
       <D:propstat>
         <D:prop>
           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
Notes:
Typo in D:href and D:getetag. "Task #2" is abcd5.ics.
VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTODO DTSTAMP:20060205T235300Z DUE;TZID=US/Eastern:20060106T120000 LAST-MODIFIED:20060205T235308Z SEQUENCE:1 STATUS:NEEDS-ACTION SUMMARY:Task #2 UID:E10BA47467C5C69BB74E8720@example.com BEGIN:VALARM ACTION:AUDIO TRIGGER;RELATED=END:-PT10M END:VALARM END:VTODO
EID 4159 (Verified) is as follows:

Section: 7.8.5

Original Text:

   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;TZID=US/Eastern:20060106T120000
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=START:-PT10M
   END:VALARM
   END:VTODO

Corrected Text:

   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;TZID=US/Eastern:20060106T120000
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=END:-PT10M
   END:VALARM
   END:VTODO
Notes:
RELATED is not START but END.

Both rfc2445 section4.8.6.3 and rfc5545 section3.8.6.3 says:

If the trigger is set relative to START, then the "DTSTART"
property MUST be present in the associated "VEVENT" or "VTODO"
calendar component. If an alarm is specified for an event with
the trigger set relative to the END, then the "DTEND" property or
the "DTSTART" and "DURATION " properties MUST be present in the
associated "VEVENT" calendar component. If the alarm is specified
for a to-do with a trigger set relative to the END, then either
the "DUE" property or the "DTSTART" and "DURATION " properties
MUST be present in the associated "VTODO" calendar component.
END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.6. Example: Retrieval of Event by UID In this example, the client requests the server to return the VEVENT component that has the UID property set to "DC6C50A017428C5216A2F1CD@example.com". See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:prop-filter name="UID"> <C:text-match collation="i;octet" >DC6C50A017428C5216A2F1CD@example.com</C:text-match> </C:prop-filter> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.7. Example: Retrieval of Events by PARTSTAT In this example, the client requests the server to return the VEVENT components that have the ATTENDEE property with the value "mailto:lisa@example.com" and for which the PARTSTAT parameter is set to NEEDS-ACTION. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:prop-filter name="ATTENDEE"> <C:text-match collation="i;ascii-casemap" >mailto:lisa@example.com</C:text-match> <C:param-filter name="PARTSTAT"> <C:text-match collation="i;ascii-casemap" >NEEDS-ACTION</C:text-match> </C:param-filter> </C:prop-filter> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.8. Example: Retrieval of Events Only In this example, the client requests the server to return all VEVENT components. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"/> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd1.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd1"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001102Z DTSTART;TZID=US/Eastern:20060102T100000 DURATION:PT1H SUMMARY:Event #1 Description:Go Steelers! UID:74855313FA803DA593CD579A@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd2.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd2"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060102T120000 DURATION:PT1H RRULE:FREQ=DAILY;COUNT=5 SUMMARY:Event #2 UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060104T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060104T120000 SUMMARY:Event #2 bis UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060106T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060106T120000 SUMMARY:Event #2 bis bis UID:00959BC664CA650E933C892C@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.9. Example: Retrieval of All Pending To-Dos In this example, the client requests the server to return all VTODO components that do not include a COMPLETED property and do not have a STATUS property value matching CANCELLED, i.e., VTODOs that still need to be worked on. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VTODO"> <C:prop-filter name="COMPLETED"> <C:is-not-defined/> </C:prop-filter> <C:prop-filter name="STATUS"> <C:text-match negate-condition="yes">CANCELLED</C:text-match> </C:prop-filter> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd4.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd4"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTODO DTSTAMP:20060205T235335Z DUE;VALUE=DATE:20060104 STATUS:NEEDS-ACTION SUMMARY:Task #1 UID:DDDEEB7915FA61233B861457@example.com BEGIN:VALARM ACTION:AUDIO TRIGGER;RELATED=END:-PT10M END:VALARM END:VTODO END:VCALENDAR </C:calendar-data>
EID 4160 (Verified) is as follows:

Section: 7.8.9

Original Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTODO
   DTSTAMP:20060205T235335Z
   DUE;VALUE=DATE:20060104
   STATUS:NEEDS-ACTION
   SUMMARY:Task #1
   UID:DDDEEB7915FA61233B861457@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=START:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTODO
   DTSTAMP:20060205T235335Z
   DUE;VALUE=DATE:20060104
   STATUS:NEEDS-ACTION
   SUMMARY:Task #1
   UID:DDDEEB7915FA61233B861457@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=END:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>
Notes:
RELATED is not START but END.

Both rfc2445 section4.8.6.3 and rfc5545 section3.8.6.3 says:

If the trigger is set relative to START, then the "DTSTART"
property MUST be present in the associated "VEVENT" or "VTODO"
calendar component. If an alarm is specified for an event with
the trigger set relative to the END, then the "DTEND" property or
the "DTSTART" and "DURATION " properties MUST be present in the
associated "VEVENT" calendar component. If the alarm is specified
for a to-do with a trigger set relative to the END, then either
the "DUE" property or the "DTSTART" and "DURATION " properties
MUST be present in the associated "VTODO" calendar component.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd5.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd5"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VTODO DTSTAMP:20060205T235300Z DUE;TZID=US/Eastern:20060106T120000 LAST-MODIFIED:20060205T235308Z SEQUENCE:1 STATUS:NEEDS-ACTION SUMMARY:Task #2 UID:E10BA47467C5C69BB74E8720@example.com BEGIN:VALARM ACTION:AUDIO TRIGGER;RELATED=END:-PT10M END:VALARM END:VTODO END:VCALENDAR </C:calendar-data>
EID 4161 (Verified) is as follows:

Section: 7.8.9

Original Text:

           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;VALUE=DATE:20060106
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=START:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTIMEZONE
   LAST-MODIFIED:20040110T032845Z
   TZID:US/Eastern
   BEGIN:DAYLIGHT
   DTSTART:20000404T020000
   RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4
   TZNAME:EDT
   TZOFFSETFROM:-0500
   TZOFFSETTO:-0400
   END:DAYLIGHT
   BEGIN:STANDARD
   DTSTART:20001026T020000
   RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
   TZNAME:EST
   TZOFFSETFROM:-0400
   TZOFFSETTO:-0500
   END:STANDARD
   END:VTIMEZONE
   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;TZID=US/Eastern:20060106T120000
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=END:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>
Notes:
1. DUE VTODO component property in abcd5.ics is using TZID=US/Eastern and response needs VTIMEZONE component.

2. RELATED is not START but END, because VTODO has only DUE property.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> 7.8.10. Example: Attempt to Query Unsupported Property In this example, the client requests the server to return all VEVENT components that include an X-ABC-GUID property with a value matching "ABC". However, the server does not support querying that non- standard property, and instead returns an error response. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop xmlns:D="DAV:"> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:prop-filter name="X-ABC-GUID"> <C:text-match>ABC</C:text-match> </C:prop-filter> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 403 Forbidden Date: Sat, 11 Nov 2005 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:error xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <C:supported-filter> <C:prop-filter name="X-ABC-GUID"/> </C:supported-filter> </D:error>
EID 1476 (Verified) is as follows:

Section: 7.8.10.

Original Text:

   <D:error>
     <C:supported-filter>
       <C:prop-filter name="X-ABC-GUID"/>
     </C:supported-filter>
   </D:error>

Corrected Text:

   <D:error xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav">
     <C:supported-filter>
       <C:prop-filter name="X-ABC-GUID"/>
     </C:supported-filter>
   </D:error>
Notes:
Proper namespace declarations should be returned in the XML response.
7.9. CALDAV:calendar-multiget REPORT The CALDAV:calendar-multiget REPORT is used to retrieve specific calendar object resources from within a collection, if the Request- URI is a collection, or to retrieve a specific calendar object resource, if the Request-URI is a calendar object resource. This report is similar to the CALDAV:calendar-query REPORT (see Section 7.8), except that it takes a list of DAV:href elements, instead of a CALDAV:filter element, to determine which calendar object resources to return. Support for the CALDAV:calendar-multiget REPORT is REQUIRED. Marshalling: The request body MUST be a CALDAV:calendar-multiget XML element (see Section 9.10). If the Request-URI is a collection resource, then the DAV:href elements MUST refer to calendar object resources within that collection, and they MAY refer to calendar object resources at any depth within the collection. As a result, the "Depth" header MUST be ignored by the server and SHOULD NOT be sent by the client. If the Request-URI refers to a non-collection resource, then there MUST be a single DAV:href element that is equivalent to the Request-URI. The response body for a successful request MUST be a DAV: multistatus XML element. The response body for a successful CALDAV:calendar-multiget REPORT request MUST contain a DAV:response element for each calendar object resource referenced by the provided set of DAV:href elements. Calendar data is being returned in the CALDAV:calendar- data element inside the DAV:prop element. In the case of an error accessing any of the provided DAV:href resources, the server MUST return the appropriate error status code in the DAV:status element of the corresponding DAV:response element. Preconditions: (CALDAV:supported-calendar-data): The attributes "content-type" and "version" of the CALDAV:calendar-data XML elements (see Section 9.6) specify a media type supported by the server for calendar object resources. (CALDAV:min-date-time): Any XML element specifying a range of time MUST have its start or end DATE or DATE-TIME values greater than or equal to the value of the CALDAV:min-date-time property value (Section 5.2.6) on the calendar collections being targeted by the REPORT request; (CALDAV:max-date-time): Any XML element specifying a range of time MUST have its start or end DATE or DATE-TIME values less than or equal to the value of the CALDAV:max-date-time property value (Section 5.2.7) on the calendar collections being targeted by the REPORT request; Postconditions: None. 7.9.1. Example: Successful CALDAV:calendar-multiget REPORT In this example, the client requests the server to return specific properties of the VEVENT components referenced by specific URIs. In addition, the DAV:getetag property is also requested and returned as part of the response. Note that in this example, the resource at http://cal.example.com/bernard/work/mtg1.ics does not exist, resulting in an error status response. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-multiget xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <D:getetag/> <C:calendar-data/> </D:prop> <D:href>/bernard/work/abcd1.ics</D:href> <D:href>/bernard/work/mtg1.ics</D:href> </C:calendar-multiget> >> Response << HTTP/1.1 207 Multi-Status Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd1.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd1"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001102Z DTSTART;TZID=US/Eastern:20060102T100000 DURATION:PT1H SUMMARY:Event #1 Description:Go Steelers! UID:74855313FA803DA593CD579A@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/mtg1.ics</D:href> <D:status>HTTP/1.1 404 Not Found</D:status> </D:response> </D:multistatus> 7.10. CALDAV:free-busy-query REPORT The CALDAV:free-busy-query REPORT generates a VFREEBUSY component containing free busy information for all the calendar object resources targeted by the request and that have the CALDAV:read-free- busy or DAV:read privilege granted to the current user. Only VEVENT components without a TRANSP property or with the TRANSP property set to OPAQUE, and VFREEBUSY components SHOULD be considered in generating the free busy time information. In the case of VEVENT components, the free or busy time type (FBTYPE) of the FREEBUSY properties in the returned VFREEBUSY component SHOULD be derived from the value of the TRANSP and STATUS properties, as outlined in the table below: +---------------------------++------------------+ | VEVENT || VFREEBUSY | +-------------+-------------++------------------+ | TRANSP | STATUS || FBTYPE | +=============+=============++==================+ | | CONFIRMED || BUSY | | | (default) || | | OPAQUE +-------------++------------------+ | (default) | CANCELLED || FREE | | +-------------++------------------+ | | TENTATIVE || BUSY-TENTATIVE | | +-------------++------------------+ | | x-name || BUSY or | | | || x-name | +-------------+-------------++------------------+ | | CONFIRMED || | | TRANSPARENT | CANCELLED || FREE | | | TENTATIVE || | | | x-name || | +-------------+-------------++------------------+ Duplicate busy time periods with the same FBTYPE parameter value SHOULD NOT be specified in the returned VFREEBUSY component. Servers SHOULD coalesce consecutive or overlapping busy time periods of the same type. Busy time periods with different FBTYPE parameter values MAY overlap. Support for the CALDAV:free-busy-query REPORT is REQUIRED. Marshalling: The request body MUST be a CALDAV:free-busy-query XML element (see Section 9.11), which MUST contain exactly one CALDAV:time-range XML element, as defined in Section 9.9. The request MAY include a Depth header. If no Depth header is included, Depth:0 is assumed. The response body for a successful request MUST be an iCalendar object that contains exactly one VFREEBUSY component that describes the busy time intervals for the calendar object resources containing VEVENT, or VFREEBUSY components that satisfy the Depth value and for which the current user is at least granted the CALDAV:read-free-busy privilege. If no calendar object resources are found to satisfy these conditions, a VFREEBUSY component with no FREEBUSY property MUST be returned. This report only returns busy time information. Free time information can be inferred from the returned busy time information. If the current user is not granted the CALDAV:read-free-busy or DAV:read privileges on the Request-URI, the CALDAV:free-busy-query REPORT request MUST fail and return a 404 (Not Found) status value. This restriction will prevent users from discovering URLs of resources for which they are only granted the CALDAV:read-free- busy privilege. The CALDAV:free-busy-query REPORT request can only be run against a collection (either a regular collection or a calendar collection). An attempt to run the report on a calendar object resource MUST fail and return a 403 (Forbidden) status value. Preconditions: None. Postconditions: (DAV:number-of-matches-within-limits): The number of matching calendar object resources must fall within server-specific, predefined limits. For example, this postcondition might fail if the specified CALDAV:time-range would cause an extremely large number of calendar object resources to be considered in computing the response. 7.10.1. Example: Successful CALDAV:free-busy-query REPORT In this example, the client requests the server to return free busy information on the calendar collection /bernard/work/, between 9:00 A.M. and 5:00 P.M. EST (2:00 P.M. and 10:00 P.M. UTC) on the January 4, 2006. The server responds, indicating two busy time intervals of one hour, one of which is tentative. See Appendix B for the calendar data being targeted by this example. >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:free-busy-query xmlns:C="urn:ietf:params:xml:ns:caldav"> <C:time-range start="20060104T140000Z" end="20060104T220000Z"/> </C:free-busy-query>
EID 4162 (Verified) is as follows:

Section: 7.10.1

Original Text:

   <?xml version="1.0" encoding="utf-8" ?>
   <C:free-busy-query xmlns:C="urn:ietf:params:xml:ns:caldav">
     <C:time-range start="20060104T140000Z"
                     end="20060105T220000Z"/>
   </C:free-busy-query>

Corrected Text:

   <?xml version="1.0" encoding="utf-8" ?>
   <C:free-busy-query xmlns:C="urn:ietf:params:xml:ns:caldav">
     <C:time-range start="20060104T140000Z"
                     end="20060104T220000Z"/>
   </C:free-busy-query>
Notes:
Typo in C:time-range/@end
>> Response << HTTP/1.1 200 OK Date: Sat, 11 Nov 2006 09:32:12 GMT Content-Type: text/calendar Content-Length: xxxx BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Server//EN BEGIN:VFREEBUSY DTSTAMP:20050125T090000Z DTSTART:20060104T140000Z DTEND:20060104T220000Z FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060104T150000Z/PT1H FREEBUSY:20060104T190000Z/PT1H END:VFREEBUSY END:VCALENDAR
EID 4163 (Verified) is as follows:

Section: 7.10.1

Original Text:

   BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Server//EN
   BEGIN:VFREEBUSY
   DTSTAMP:20050125T090000Z
   DTSTART:20060104T140000Z
   DTEND:20060105T220000Z
   FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060104T150000Z/PT1H
   FREEBUSY:20060104T190000Z/PT1H
   END:VFREEBUSY
   END:VCALENDAR

Corrected Text:

   BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Server//EN
   BEGIN:VFREEBUSY
   DTSTAMP:20050125T090000Z
   DTSTART:20060104T140000Z
   DTEND:20060104T220000Z
   FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060104T150000Z/PT1H
   FREEBUSY:20060104T190000Z/PT1H
   END:VFREEBUSY
   END:VCALENDAR
Notes:
Typo in DTEND.
8. Guidelines 8.1. Client-to-Client Interoperability There are a number of actions clients can take that will be legal (the server will not return errors), but that can degrade interoperability with other client implementations accessing the same data. For example, a recurrence rule could be replaced with a set of recurrence dates, a single recurring event could be replaced with a set of independent resources to represent each recurrence, or the start/end time values can be translated from the original time zone to another time zone. Although this advice amounts to iCalendar interoperability best practices and is not limited only to CalDAV usage, interoperability problems are likely to be more evident in CalDAV use cases. 8.2. Synchronization Operations WebDAV already provides functionality required to synchronize a collection or set of collections, to make changes offline, and provides a simple way to resolve conflicts when reconnected. ETags are the key to making this work, but these are not required of all WebDAV servers. Since offline functionality is more important to calendar applications than to some other WebDAV applications, CalDAV servers MUST support ETags, as specified in Section 5.3.4. 8.2.1. Use of Reports 8.2.1.1. Restrict the Time Range The reports provided in CalDAV can be used by clients to optimize their performance in terms of network bandwidth usage and resource consumption on the local client machine. Both are certainly major considerations for mobile or handheld devices with limited capacity, but they are also relevant to desktop client applications in cases where the calendar collections contain large amounts of data. Typically, clients present calendar data to users in views that span a finite time interval, so whenever possible, clients should only retrieve calendar components from the server using CALDAV:calendar- query REPORT, combined with a CALDAV:time-range element, to limit the set of returned components to just those needed to populate the current view. 8.2.1.2. Synchronize by Time Range Typically in a calendar, historical data (events, to-dos, etc. that have completed prior to the current date) do not change, though they may be deleted. As a result, a client can speed up the synchronization process by only considering data for the present time and the future up to a reasonable limit (e.g., one week, one month). If the user then tries to examine a portion of the calendar outside the range that has been synchronized, the client can perform another synchronization operation on the new time interval being examined. This "just-in-time" synchronization can minimize bandwidth for common user interaction behaviors. 8.2.1.3. Synchronization Process If a client wants to support calendar data synchronization, as opposed to downloading calendar data each time it is needed, the client needs to cache the calendar object resource's URI and ETag, along with the actual calendar data. While the URI remains static for the lifetime of the calendar object resource, the ETag will change with each successive change to the calendar object resource. Thus, to synchronize a local data cache with the server, the client can first fetch the URI/ETag pairs for the time interval being considered, and compare those results with the cached data. Any cached component whose ETag differs from that on the server needs to be refreshed. In order to properly detect the changes between the server and client data, the client will need to keep a record of which calendar object resources have been created, changed, or deleted since the last synchronization operation so that it can reconcile those changes with the data on the server. Here's an example of how to do that: The client issues a CALDAV:calendar-query REPORT request for a specific time range and asks for only the DAV:getetag property to be returned: REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <D:getetag/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"> <C:comp-filter name="VEVENT"> <C:time-range start="20040902T000000Z" end="20040903T000000Z"/> </C:comp-filter> </C:comp-filter> </C:filter> </C:calendar-query> The client then uses the results to determine which calendar object resources have changed, been created, or deleted on the server, and how those relate to locally cached calendar object resources that may have changed, been created, or deleted. If the client determines that there are calendar object resources on the server that need to be fetched, the client issues a CALDAV:calendar-multiget REPORT request to fetch its calendar data: REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-multiget xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <D:getetag/> <C:calendar-data/> </D:prop> <D:href>/bernard/work/abcd1.ics</D:href> <D:href>/bernard/work/mtg1.ics</D:href> </C:calendar-multiget> 8.2.2. Restrict the Properties Returned A client may not need all the calendar properties of a calendar object resource when presenting information to the user. Since some calendar property values can be large (e.g., ATTACH or ATTENDEE), a client can choose to restrict the calendar properties to be returned in a calendaring REPORT request to those it knows it will use. However, if a client needs to make a change to a calendar object resource, it can only change the entire calendar object resource via a PUT request. There is currently no way to incrementally make a change to a set of calendar properties of a calendar object resource. As a result, the client will have to get the entire calendar object resource that is being changed. 8.3. Use of Locking WebDAV locks can be used to prevent two clients that are modifying the same resource from either overwriting each others' changes (though that problem can also be solved by using ETags) or wasting time making changes that will conflict with another set of changes. In a multi-user calendar system, an interactive calendar client could lock an event while the user is editing the event, and unlock the event when the user finishes or cancels. Locks can also be used to prevent changes while data is being reorganized. For example, a calendar client might lock two calendar collections prior to moving a bunch of calendar resources from one to another. Clients are responsible for requesting a lock timeout period that is appropriate to the use case. When the user explicitly decides to reserve a resource and prevent other changes, a long timeout might be appropriate, but in cases where the client automatically decides to lock the resource, the timeout should be short (and the client can always refresh the lock should it need to). A short lock timeout means that if the client is unable to remove the lock, the other calendar users aren't prevented from making changes. 8.4. Finding Calendars Much of the time, a calendar client (or agent) will discover a new calendar's location by being provided directly with the URL. For example, a user will type his or her own calendar location into client configuration information or copy and paste a URL from email into the calendar application. The client need only confirm that the URL points to a resource that is a calendar collection. The client may also be able to browse WebDAV collections to find calendar collections. The choice of HTTP URLs means that calendar object resources are backward compatible with existing software, but does have the disadvantage that existing software does not usually know to look at the OPTIONS response to that URL to determine what can be done with it. This is somewhat of a barrier for WebDAV usage as well as with CalDAV usage. This specification does not offer a way through this other than making the information available in the OPTIONS response should this be requested. For calendar sharing and scheduling use cases, one might wish to find the calendar belonging to another user. If the other user has a calendar in the same repository, that calendar can be found by using the principal namespace required by WebDAV ACL support. For other cases, the authors have no universal solution, but implementers can consider whether to use vCard [RFC2426] or LDAP [RFC4511] standards together with calendar attributes [RFC2739]. Because CalDAV requires servers to support WebDAV ACL [RFC3744], including principal namespaces, and with the addition of the CALDAV: calendar-home-set property, there are a couple options for CalDAV clients to find one's own calendar or another user's calendar. In this case, a DAV:principal-match REPORT is used to find a named property (the CALDAV:calendar-home-set) on the Principal-URL of the current user. Using this, a WebDAV client can learn "who am I" and "where are my calendars". The REPORT request body looks like this: <?xml version="1.0" encoding="utf-8" ?> <D:principal-match xmlns:D="DAV:"> <D:self/> <D:prop> <C:calendar-home-set xmlns:C="urn:ietf:params:xml:ns:caldav"/> </D:prop> </D:principal-match> To find other users' calendars, the DAV:principal-property-search REPORT can be used to filter on some properties and return others. To search for a calendar owned by a user named "Laurie", the REPORT request body would look like this: <?xml version="1.0" encoding="utf-8" ?> <D:principal-property-search xmlns:D="DAV:"> <D:property-search> <D:prop> <D:displayname/> </D:prop> <D:match>Laurie</D:match> </D:property-search> <D:prop> <C:calendar-home-set xmlns:C="urn:ietf:params:xml:ns:caldav"/> <D:displayname/> </D:prop> </D:principal-property-search> The server performs a case-sensitive or caseless search for a matching string subset of "Laurie" within the DAV:displayname property. Thus, the server might return "Laurie Dusseault", "Laurier Desruisseaux", or "Wilfrid Laurier" as matching DAV:displayname values, and return the calendars for each of these. 8.5. Storing and Using Attachments CalDAV clients MAY create attachments in calendar components either as inline or external. This section contains some guidelines for creating and managing attachments. 8.5.1. Inline Attachments CalDAV clients MUST support inline attachments as specified in iCalendar [RFC2445]. CalDAV servers MUST support inline attachments, so clients can rely on being able to create attachments this way. On the other hand, inline attachments have some drawbacks: o Servers MAY impose limitations on the size of calendar object resources (i.e., refusing PUT requests of very large iCalendar objects). Servers that impose such limitations MUST use the CALDAV:max-resource-size property on a calendar collection to inform the client as to what the limitation is (see Section 5.2.5). o Servers MAY impose storage quota limitations on calendar collections (See [RFC4331]). o Any change to a calendar object resource containing an inline attachment requires the entire inline attachment to be re- uploaded. o Clients synchronizing a changed calendar object resource have to download the entire calendar object resource, even if the attachment is unchanged. 8.5.2. External Attachments CalDAV clients SHOULD support downloading of external attachments referenced by arbitrary URI schemes, by either processing them directly, or by passing the attachment URI to a suitable "helper application" for processing, if such an application exists. CalDAV clients MUST support downloading of external attachments referenced by the "http" or "https" URI schemes. An external attachment could be: o In a collection in the calendar collection containing the calendar object resource; o Somewhere else in the same repository that hosts the calendar collection; or o On an HTTP or FTP server elsewhere. CalDAV servers MAY provide support for child collections in calendar collections. CalDAV servers MAY allow the MKCOL method to create child collections in calendar collections. Child collections of calendar collections MAY contain any type of resource except calendar collections that they MUST NOT contain. Some CalDAV servers won't allow child collections in calendar collections, and it may be possible on such a server to discover other locations where attachments can be stored. Clients are entirely responsible for maintaining reference consistency with calendar components that link to external attachments. A client deleting a calendar component with an external attachment might therefore also delete the attachment if that's appropriate; however, appropriateness can be very hard to determine. A new component might easily reference some pre-existing Web resource that is intended to have independent existence from the calendar component (the "attachment" could be a major proposal to be discussed in a meeting, for instance). Best practices will probably emerge and should probably be documented, but for now, clients should be wary of engaging in aggressive "cleanup" of external attachments. A client could involve the user in making decisions about removing unreferenced documents, or a client could be conservative in only deleting attachments it had created. Also, clients are responsible for consistency of permissions when using external attachments. One reason for servers to support the storage of attachments within child collections of calendar collections is that ACL inheritance might make it easier to grant the same permissions to attachments that are granted on the calendar collection. Otherwise, it can be very difficult to keep permissions synchronized. With attachments stored on separate repositories, it can be impossible to keep permissions consistent -- the two repositories may not support the same permissions or have the same set of principals. Some systems have used tickets or other anonymous access control mechanisms to provide partially satisfactory solutions to these kinds of problems. 8.6. Storing and Using Alarms Note that all CalDAV calendar collections (including those the user might treat as public or group calendars) can contain alarm information on events and to-dos. Users can synchronize a calendar between multiple devices and decide to have alarms execute on a different device than the device that created the alarm. Not all alarm action types are completely interoperable (e.g., those that name a sound file to play). When the action is AUDIO and the client is configured to execute the alarm, the client SHOULD play the suggested sound if it's available or play another sound, but SHOULD NOT rewrite the alarm just to replace the suggested sound with a sound that's locally available. When the action is DISPLAY and the client is configured to execute the alarm, the client SHOULD execute a display alarm by displaying according to the suggested description or some reasonable replacement, but SHOULD NOT rewrite the alarm for its own convenience. When the action is EMAIL and the client is incapable of sending email, it SHOULD ignore the alarm, but it MUST continue to synchronize the alarm itself. This specification makes no recommendations about executing alarms of type PROCEDURE, except to note that clients are advised to take care to avoid creating security holes by executing these. Non-interoperable alarm information (e.g., should somebody define a color to be used in a display alarm) should be put in non-standard properties inside the VALARM component in order to keep the basic alarm usable on all devices. Clients that allow changes to calendar object resources MUST synchronize the alarm data that already exists in the resources. Clients MAY execute alarms that are downloaded in this fashion, possibly based on user preference. If a client is only doing read operations on a calendar and there is no risk of losing alarm information, then the client MAY discard alarm information. This specification makes no attempt to provide multi-user alarms on group calendars or to find out for whom an alarm is intended. Addressing those issues might require extensions to iCalendar; for example, to store alarms per-user, or to indicate for which user a VALARM was intended. In the meantime, clients might maximize interoperability by generally not uploading alarm information to public, group, or resource calendars. 9. XML Element Definitions 9.1. CALDAV:calendar XML Element Name: calendar Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies the resource type of a calendar collection. Description: See Section 4.2. Definition: <!ELEMENT calendar EMPTY> 9.2. CALDAV:mkcalendar XML Element Name: mkcalendar Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a request that includes the WebDAV property values to be set for a calendar collection resource when it is created. Description: See Section 5.3.1. Definition: <!ELEMENT mkcalendar (DAV:set)> 9.3. CALDAV:mkcalendar-response XML Element Name: mkcalendar-response Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a response body for a successful MKCALENDAR request. Description: See Section 5.3.1. Definition: <!ELEMENT mkcalendar-response ANY> 9.4. CALDAV:supported-collation XML Element Name: supported-collation Namespace: urn:ietf:params:xml:ns:caldav Purpose: Identifies a single collation via its collation identifier, as defined by [RFC4790]. Description: The CALDAV:supported-collation contains the text of a collation identifier, as described in Section 7.5.1. Definition: <!ELEMENT supported-collation (#PCDATA)> PCDATA value: collation identifier 9.5. CALDAV:calendar-query XML Element Name: calendar-query Namespace: urn:ietf:params:xml:ns:caldav Purpose: Defines a report for querying calendar object resources. Description: See Section 7.8. Definition: <!ELEMENT calendar-query ((DAV:allprop | DAV:propname | DAV:prop)?, filter, timezone?)> 9.6. CALDAV:calendar-data XML Element Name: calendar-data Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specified one of the following: 1. A supported media type for calendar object resources when nested in the CALDAV:supported-calendar-data property; 2. The parts of a calendar object resource should be returned by a calendaring report; 3. The content of a calendar object resource in a response to a calendaring report. Description: When nested in the CALDAV:supported-calendar-data property, the CALDAV:calendar-data XML element specifies a media type supported by the CalDAV server for calendar object resources. When used in a calendaring REPORT request, the CALDAV:calendar- data XML element specifies which parts of calendar object resources need to be returned in the response. If the CALDAV: calendar-data XML element doesn't contain any CALDAV:comp element, calendar object resources will be returned in their entirety. Finally, when used in a calendaring REPORT response, the CALDAV: calendar-data XML element specifies the content of a calendar object resource. Given that XML parsers normalize the two- character sequence CRLF (US-ASCII decimal 13 and US-ASCII decimal 10) to a single LF character (US-ASCII decimal 10), the CR character (US-ASCII decimal 13) MAY be omitted in calendar object resources specified in the CALDAV:calendar-data XML element. Furthermore, calendar object resources specified in the CALDAV: calendar-data XML element MAY be invalid per their media type specification if the CALDAV:calendar-data XML element part of the calendaring REPORT request did not specify required properties (e.g., UID, DTSTAMP, etc.), or specified a CALDAV:prop XML element with the "novalue" attribute set to "yes". Note: The CALDAV:calendar-data XML element is specified in requests and responses inside the DAV:prop XML element as if it were a WebDAV property. However, the CALDAV:calendar-data XML element is not a WebDAV property and, as such, is not returned in PROPFIND responses, nor used in PROPPATCH requests. Note: The iCalendar data embedded within the CALDAV:calendar-data XML element MUST follow the standard XML character data encoding rules, including use of &lt;, &gt;, &amp; etc. entity encoding or the use of a <![CDATA[ ... ]]> construct. In the later case, the iCalendar data cannot contain the character sequence "]]>", which is the end delimiter for the CDATA section. Definition: <!ELEMENT calendar-data EMPTY> when nested in the CALDAV:supported-calendar-data property to specify a supported media type for calendar object resources; <!ELEMENT calendar-data (comp?, (expand | limit-recurrence-set)?, limit-freebusy-set?)> when nested in the DAV:prop XML element in a calendaring REPORT request to specify which parts of calendar object resources should be returned in the response; <!ELEMENT calendar-data (#PCDATA)> PCDATA value: iCalendar object when nested in the DAV:prop XML element in a calendaring REPORT response to specify the content of a returned calendar object resource. <!ATTLIST calendar-data content-type CDATA "text/calendar" version CDATA "2.0"> content-type value: a MIME media type version value: a version string attributes can be used on all three variants of the CALDAV:calendar-data XML element. 9.6.1. CALDAV:comp XML Element Name: comp Namespace: urn:ietf:params:xml:ns:caldav Purpose: Defines which component types to return. Description: The name value is a calendar component name (e.g., VEVENT). Definition: <!ELEMENT comp ((allprop | prop*), (allcomp | comp*))> <!ATTLIST comp name CDATA #REQUIRED> name value: a calendar component name Note: The CALDAV:prop and CALDAV:allprop elements have the same name as the DAV:prop and DAV:allprop elements defined in [RFC2518]. However, the CALDAV:prop and CALDAV:allprop elements are defined in the "urn:ietf:params:xml:ns:caldav" namespace instead of the "DAV:" namespace. 9.6.2. CALDAV:allcomp XML Element Name: allcomp Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies that all components shall be returned. Description: The CALDAV:allcomp XML element can be used when the client wants all types of components returned by a calendaring REPORT request. Definition: <!ELEMENT allcomp EMPTY> 9.6.3. CALDAV:allprop XML Element Name: allprop Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies that all properties shall be returned. Description: The CALDAV:allprop XML element can be used when the client wants all properties of components returned by a calendaring REPORT request. Definition: <!ELEMENT allprop EMPTY> Note: The CALDAV:allprop element has the same name as the DAV: allprop element defined in [RFC2518]. However, the CALDAV:allprop element is defined in the "urn:ietf:params:xml:ns:caldav" namespace instead of the "DAV:" namespace. 9.6.4. CALDAV:prop XML Element Name: prop Namespace: urn:ietf:params:xml:ns:caldav Purpose: Defines which properties to return in the response. Description: The "name" attribute specifies the name of the calendar property to return (e.g., ATTENDEE). The "novalue" attribute can be used by clients to request that the actual value of the property not be returned (if the "novalue" attribute is set to "yes"). In that case, the server will return just the iCalendar property name and any iCalendar parameters and a trailing ":" without the subsequent value data. Definition: <!ELEMENT prop EMPTY> <!ATTLIST prop name CDATA #REQUIRED novalue (yes | no) "no"> name value: a calendar property name novalue value: "yes" or "no" Note: The CALDAV:prop element has the same name as the DAV:prop element defined in [RFC2518]. However, the CALDAV:prop element is defined in the "urn:ietf:params:xml:ns:caldav" namespace instead of the "DAV:" namespace. 9.6.5. CALDAV:expand XML Element Name: expand Namespace: urn:ietf:params:xml:ns:caldav Purpose: Forces the server to expand recurring components into individual recurrence instances. Description: The CALDAV:expand XML element specifies that for a given calendaring REPORT request, the server MUST expand the recurrence set into calendar components that define exactly one recurrence instance, and MUST return only those whose scheduled time intersect a specified time range. The "start" attribute specifies the inclusive start of the time range, and the "end" attribute specifies the non-inclusive end of the time range. Both attributes are specified as date with UTC time value. The value of the "end" attribute MUST be greater than the value of the "start" attribute. The server MUST use the same logic as defined for CALDAV:time- range to determine if a recurrence instance intersects the specified time range. Recurring components, other than the initial instance, MUST include a RECURRENCE-ID property indicating which instance they refer to. The returned calendar components MUST NOT use recurrence properties (i.e., EXDATE, EXRULE, RDATE, and RRULE) and MUST NOT have reference to or include VTIMEZONE components. Date and local time with reference to time zone information MUST be converted into date with UTC time. Definition: <!ELEMENT expand EMPTY> <!ATTLIST expand start CDATA #REQUIRED end CDATA #REQUIRED> start value: an iCalendar "date with UTC time" end value: an iCalendar "date with UTC time" 9.6.6. CALDAV:limit-recurrence-set XML Element Name: limit-recurrence-set Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a time range to limit the set of "overridden components" returned by the server. Description: The CALDAV:limit-recurrence-set XML element specifies that for a given calendaring REPORT request, the server MUST return, in addition to the "master component", only the "overridden components" that impact a specified time range. An overridden component impacts a time range if its current start and end times overlap the time range, or if the original start and end times -- the ones that would have been used if the instance were not overridden -- overlap the time range. The "start" attribute specifies the inclusive start of the time range, and the "end" attribute specifies the non-inclusive end of the time range. Both attributes are specified as date with UTC time value. The value of the "end" attribute MUST be greater than the value of the "start" attribute. The server MUST use the same logic as defined for CALDAV:time- range to determine if the current or original scheduled time of an "overridden" recurrence instance intersects the specified time range. Overridden components that have a RANGE parameter on their RECURRENCE-ID property may specify one or more instances in the recurrence set, and some of those instances may fall within the specified time range or may have originally fallen within the specified time range prior to being overridden. If that is the case, the overridden component MUST be included in the results, as it has a direct impact on the interpretation of instances within the specified time range. Definition: <!ELEMENT limit-recurrence-set EMPTY> <!ATTLIST limit-recurrence-set start CDATA #REQUIRED end CDATA #REQUIRED> start value: an iCalendar "date with UTC time" end value: an iCalendar "date with UTC time" 9.6.7. CALDAV:limit-freebusy-set XML Element Name: limit-freebusy-set Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a time range to limit the set of FREEBUSY values returned by the server. Description: The CALDAV:limit-freebusy-set XML element specifies that for a given calendaring REPORT request, the server MUST only return the FREEBUSY property values of a VFREEBUSY component that intersects a specified time range. The "start" attribute specifies the inclusive start of the time range, and the "end" attribute specifies the non-inclusive end of the time range. Both attributes are specified as "date with UTC time" value. The value of the "end" attribute MUST be greater than the value of the "start" attribute. The server MUST use the same logic as defined for CALDAV:time- range to determine if a FREEBUSY property value intersects the specified time range. Definition: <!ELEMENT limit-freebusy-set EMPTY> <!ATTLIST limit-freebusy-set start CDATA #REQUIRED end CDATA #REQUIRED> start value: an iCalendar "date with UTC time" end value: an iCalendar "date with UTC time" 9.7. CALDAV:filter XML Element Name: filter Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a filter to limit the set of calendar components returned by the server. Description: The CALDAV:filter XML element specifies the search filter used to limit the calendar components returned by a calendaring REPORT request. Definition: <!ELEMENT filter (comp-filter)> 9.7.1. CALDAV:comp-filter XML Element Name: comp-filter Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies search criteria on calendar components. Description: The CALDAV:comp-filter XML element specifies a query targeted at the calendar object (i.e., VCALENDAR) or at a specific calendar component type (e.g., VEVENT). The scope of the CALDAV:comp-filter XML element is the calendar object when used as a child of the CALDAV:filter XML element. The scope of the CALDAV:comp-filter XML element is the enclosing calendar component when used as a child of another CALDAV:comp-filter XML element. A CALDAV:comp-filter is said to match if: * The CALDAV:comp-filter XML element is empty and the calendar object or calendar component type specified by the "name" attribute exists in the current scope; or: * The CALDAV:comp-filter XML element contains a CALDAV:is-not- defined XML element and the calendar object or calendar component type specified by the "name" attribute does not exist in the current scope; or: * The CALDAV:comp-filter XML element contains a CALDAV:time-range XML element and at least one recurrence instance in the targeted calendar component is scheduled to overlap the specified time range, and all specified CALDAV:prop-filter and CALDAV:comp-filter child XML elements also match the targeted calendar component; or: * The CALDAV:comp-filter XML element only contains CALDAV:prop- filter and CALDAV:comp-filter child XML elements that all match the targeted calendar component. Definition: <!ELEMENT comp-filter (is-not-defined | (time-range?, prop-filter*, comp-filter*))> <!ATTLIST comp-filter name CDATA #REQUIRED> name value: a calendar object or calendar component type (e.g., VEVENT) 9.7.2. CALDAV:prop-filter XML Element Name: prop-filter Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies search criteria on calendar properties. Description: The CALDAV:prop-filter XML element specifies a query targeted at a specific calendar property (e.g., CATEGORIES) in the scope of the enclosing calendar component. A calendar property is said to match a CALDAV:prop-filter if: * The CALDAV:prop-filter XML element is empty and a property of the type specified by the "name" attribute exists in the enclosing calendar component; or: * The CALDAV:prop-filter XML element contains a CALDAV:is-not- defined XML element and no property of the type specified by the "name" attribute exists in the enclosing calendar component; or: * The CALDAV:prop-filter XML element contains a CALDAV:time-range XML element and the property value overlaps the specified time range, and all specified CALDAV:param-filter child XML elements also match the targeted property; or: * The CALDAV:prop-filter XML element contains a CALDAV:text-match XML element and the property value matches it, and all specified CALDAV:param-filter child XML elements also match the targeted property; Definition: <!ELEMENT prop-filter (is-not-defined | ((time-range | text-match)?, param-filter*))> <!ATTLIST prop-filter name CDATA #REQUIRED> name value: a calendar property name (e.g., ATTENDEE) 9.7.3. CALDAV:param-filter XML Element Name: param-filter Namespace: urn:ietf:params:xml:ns:caldav Purpose: Limits the search to specific parameter values. Description: The CALDAV:param-filter XML element specifies a query targeted at a specific calendar property parameter (e.g., PARTSTAT) in the scope of the calendar property on which it is defined. A calendar property parameter is said to match a CALDAV: param-filter if: * The CALDAV:param-filter XML element is empty and a parameter of the type specified by the "name" attribute exists on the calendar property being examined; or: * The CALDAV:param-filter XML element contains a CALDAV:is-not- defined XML element and no parameter of the type specified by the "name" attribute exists on the calendar property being examined; Definition: <!ELEMENT param-filter (is-not-defined | text-match?)> <!ATTLIST param-filter name CDATA #REQUIRED> name value: a property parameter name (e.g., PARTSTAT) 9.7.4. CALDAV:is-not-defined XML Element Name: is-not-defined Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies that a match should occur if the enclosing component, property, or parameter does not exist. Description: The CALDAV:is-not-defined XML element specifies that a match occurs if the enclosing component, property, or parameter value specified in a calendaring REPORT request does not exist in the calendar data being tested. Definition: <!ELEMENT is-not-defined EMPTY> 9.7.5. CALDAV:text-match XML Element Name: text-match Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a substring match on a property or parameter value. Description: The CALDAV:text-match XML element specifies text used for a substring match against the property or parameter value specified in a calendaring REPORT request. The "collation" attribute is used to select the collation that the server MUST use for character string matching. In the absence of this attribute, the server MUST use the "i;ascii-casemap" collation. The "negate-condition" attribute is used to indicate that this test returns a match if the text matches when the attribute value is set to "no", or return a match if the text does not match, if the attribute value is set to "yes". For example, this can be used to match components with a STATUS property not set to CANCELLED. Definition: <!ELEMENT text-match (#PCDATA)> PCDATA value: string <!ATTLIST text-match collation CDATA "i;ascii-casemap" negate-condition (yes | no) "no"> 9.8. CALDAV:timezone XML Element Name: timezone Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies the time zone component to use when determining the results of a report. Description: The CALDAV:timezone XML element specifies that for a given calendaring REPORT request, the server MUST rely on the specified VTIMEZONE component instead of the CALDAV:calendar- timezone property of the calendar collection, in which the calendar object resource is contained to resolve "date" values and "date with local time" values (i.e., floating time) to "date with UTC time" values. The server will require this information to determine if a calendar component scheduled with "date" values or "date with local time" values intersects a CALDAV:time-range specified in a CALDAV:calendar-query REPORT. Note: The iCalendar data embedded within the CALDAV:timezone XML element MUST follow the standard XML character data encoding rules, including use of &lt;, &gt;, &amp; etc. entity encoding or the use of a <![CDATA[ ... ]]> construct. In the later case, the iCalendar data cannot contain the character sequence "]]>", which is the end delimiter for the CDATA section. Definition: <!ELEMENT timezone (#PCDATA)> PCDATA value: an iCalendar object with exactly one VTIMEZONE 9.9. CALDAV:time-range XML Element Name: time-range Namespace: urn:ietf:params:xml:ns:caldav Purpose: Specifies a time range to limit the set of calendar components returned by the server. Description: The CALDAV:time-range XML element specifies that for a given calendaring REPORT request, the server MUST only return the calendar object resources that, depending on the context, have a component or property whose value intersects a specified time range. The "start" attribute specifies the inclusive start of the time range, and the "end" attribute specifies the non-inclusive end of the time range. Both attributes MUST be specified as "date with UTC time" value. Time ranges open at one end can be specified by including only one attribute; however, at least one attribute MUST always be present in the CALDAV:time-range element. If either the "start" or "end" attribute is not specified in the CALDAV:time- range XML element, assume "-infinity" and "+infinity" as their value, respectively. If both "start" and "end" are present, the value of the "end" attribute MUST be greater than the value of the "start" attribute. Time range tests MUST consider every recurrence instance when testing the time range condition; if any one instance matches, then the test returns true. Testing recurrence instances requires the server to infer an effective value for DTSTART, DTEND, DURATION, and DUE properties for an instance based on the recurrence patterns and any overrides. A VEVENT component overlaps a given time range if the condition for the corresponding component state specified in the table below is satisfied. Note that, as specified in [RFC2445], the DTSTART property is REQUIRED in the VEVENT component. The conditions depend on the presence of the DTEND and DURATION properties in the VEVENT component. Furthermore, the value of the DTEND property MUST be later in time than the value of the DTSTART property. The duration of a VEVENT component with no DTEND and DURATION properties is 1 day (+P1D) when the DTSTART is a DATE value, and 0 seconds when the DTSTART is a DATE-TIME value. +---------------------------------------------------------------+ | VEVENT has the DTEND property? | | +-----------------------------------------------------------+ | | VEVENT has the DURATION property? | | | +-------------------------------------------------------+ | | | DURATION property value is greater than 0 seconds? | | | | +---------------------------------------------------+ | | | | DTSTART property is a DATE-TIME value? | | | | | +-----------------------------------------------+ | | | | | Condition to evaluate | +---+---+---+---+-----------------------------------------------+ | Y | N | N | * | (start < DTEND AND end > DTSTART) | +---+---+---+---+-----------------------------------------------+ | N | Y | Y | * | (start < DTSTART+DURATION AND end > DTSTART) | | | +---+---+-----------------------------------------------+ | | | N | * | (start <= DTSTART AND end > DTSTART) | +---+---+---+---+-----------------------------------------------+ | N | N | N | Y | (start <= DTSTART AND end > DTSTART) | +---+---+---+---+-----------------------------------------------+ | N | N | N | N | (start < DTSTART+P1D AND end > DTSTART) | +---+---+---+---+-----------------------------------------------+ A VTODO component is said to overlap a given time range if the condition for the corresponding component state specified in the table below is satisfied. The conditions depend on the presence of the DTSTART, DURATION, DUE, COMPLETED, and CREATED properties in the VTODO component. Note that, as specified in [RFC2445], the DUE value MUST be a DATE-TIME value equal to or after the DTSTART value if specified. +-------------------------------------------------------------------+ | VTODO has the DTSTART property? | | +---------------------------------------------------------------+ | | VTODO has the DURATION property? | | | +-----------------------------------------------------------+ | | | VTODO has the DUE property? | | | | +-------------------------------------------------------+ | | | | VTODO has the COMPLETED property? | | | | | +---------------------------------------------------+ | | | | | VTODO has the CREATED property? | | | | | | +-----------------------------------------------+ | | | | | | Condition to evaluate | +---+---+---+---+---+-----------------------------------------------+ | Y | Y | N | * | * | (start <= DTSTART+DURATION) AND | | | | | | | ((end > DTSTART) OR | | | | | | | (end >= DTSTART+DURATION)) | +---+---+---+---+---+-----------------------------------------------+ | Y | N | Y | * | * | ((start < DUE) OR (start <= DTSTART)) | | | | | | | AND | | | | | | | ((end > DTSTART) OR (end >= DUE)) | +---+---+---+---+---+-----------------------------------------------+ | Y | N | N | * | * | (start <= DTSTART) AND (end > DTSTART) | +---+---+---+---+---+-----------------------------------------------+ | N | N | Y | * | * | (start < DUE) AND (end >= DUE) | +---+---+---+---+---+-----------------------------------------------+ | N | N | N | Y | Y | ((start <= CREATED) OR (start <= COMPLETED))| | | | | | | AND | | | | | | | ((end >= CREATED) OR (end >= COMPLETED))| +---+---+---+---+---+-----------------------------------------------+ | N | N | N | Y | N | (start <= COMPLETED) AND (end >= COMPLETED) | +---+---+---+---+---+-----------------------------------------------+ | N | N | N | N | Y | (end > CREATED) | +---+---+---+---+---+-----------------------------------------------+ | N | N | N | N | N | TRUE | +---+---+---+---+---+-----------------------------------------------+ A VJOURNAL component overlaps a given time range if the condition for the corresponding component state specified in the table below is satisfied. The conditions depend on the presence of the DTSTART property in the VJOURNAL component and on whether the DTSTART is a DATE-TIME or DATE value. The effective "duration" of a VJOURNAL component is 1 day (+P1D) when the DTSTART is a DATE value, and 0 seconds when the DTSTART is a DATE-TIME value. +----------------------------------------------------+ | VJOURNAL has the DTSTART property? | | +------------------------------------------------+ | | DTSTART property is a DATE-TIME value? | | | +--------------------------------------------+ | | | Condition to evaluate | +---+---+--------------------------------------------+ | Y | Y | (start <= DTSTART) AND (end > DTSTART) | +---+---+--------------------------------------------+ | Y | N | (start < DTSTART+P1D) AND (end > DTSTART) | +---+---+--------------------------------------------+ | N | * | FALSE | +---+---+--------------------------------------------+ A VFREEBUSY component overlaps a given time range if the condition for the corresponding component state specified in the table below is satisfied. The conditions depend on the presence in the VFREEBUSY component of the DTSTART and DTEND properties, and any FREEBUSY properties in the absence of DTSTART and DTEND. Any DURATION property is ignored, as it has a special meaning when used in a VFREEBUSY component. When only FREEBUSY properties are used, each period in each FREEBUSY property is compared against the time range, irrespective of the type of free busy information (free, busy, busy-tentative, busy-unavailable) represented by the property. +------------------------------------------------------+ | VFREEBUSY has both the DTSTART and DTEND properties? | | +--------------------------------------------------+ | | VFREEBUSY has the FREEBUSY property? | | | +----------------------------------------------+ | | | Condition to evaluate | +---+---+----------------------------------------------+ | Y | * | (start <= DTEND) AND (end > DTSTART) | +---+---+----------------------------------------------+ | N | Y | (start < freebusy-period-end) AND | | | | (end > freebusy-period-start) | +---+---+----------------------------------------------+ | N | N | FALSE | +---+---+----------------------------------------------+ A VALARM component is said to overlap a given time range if the following condition holds: (start <= trigger-time) AND (end > trigger-time) A VALARM component can be defined such that it triggers repeatedly. Such a VALARM component is said to overlap a given time range if at least one of its triggers overlaps the time range. The calendar properties COMPLETED, CREATED, DTEND, DTSTAMP, DTSTART, DUE, and LAST-MODIFIED overlap a given time range if the following condition holds: (start <= date-time) AND (end > date-time) Note that if DTEND is not present in a VEVENT, but DURATION is, then the test should instead operate on the 'effective' DTEND, i.e., DTSTART+DURATION. Similarly, if DUE is not present in a VTODO, but DTSTART and DURATION are, then the test should instead operate on the 'effective' DUE, i.e., DTSTART+DURATION. The semantic of CALDAV:time-range is not defined for any other calendar components and properties. Definition: <!ELEMENT time-range EMPTY> <!ATTLIST time-range start CDATA #IMPLIED end CDATA #IMPLIED> start value: an iCalendar "date with UTC time" end value: an iCalendar "date with UTC time" 9.10. CALDAV:calendar-multiget XML Element Name: calendar-multiget Namespace: urn:ietf:params:xml:ns:caldav Purpose: CalDAV report used to retrieve specific calendar object resources. Description: See Section 7.9. Definition: <!ELEMENT calendar-multiget ((DAV:allprop | DAV:propname | DAV:prop)?, DAV:href+)> 9.11. CALDAV:free-busy-query XML Element Name: free-busy-query Namespace: urn:ietf:params:xml:ns:caldav Purpose: CalDAV report used to generate a VFREEBUSY to determine busy time over a specific time range. Description: See Section 7.10. Definition: <!ELEMENT free-busy-query (time-range)> 10. Internationalization Considerations CalDAV allows internationalized strings to be stored and retrieved for the description of calendar collections (see Section 5.2.1). The CALDAV:calendar-query REPORT (Section 7.8) includes a text searching option controlled by the CALDAV:text-match element, and details of character handling are covered in the description of that element (see Section 9.7.5). 11. Security Considerations HTTP protocol transactions are sent in the clear over the network unless protection from snooping is negotiated. This can be accomplished by use of TLS, as defined in [RFC2818]. In particular, HTTP Basic authentication MUST NOT be used unless TLS is in effect. Servers MUST take adequate precautions to ensure that malicious clients cannot consume excessive server resources (CPU, memory, disk, etc.) through carefully crafted reports. For example, a client could upload an event with a recurrence rule that specifies a recurring event occurring every second for the next 100 years, which would result in approximately 3 x 10^9 instances! A report that asks for recurrences to be expanded over that range would likely constitute a denial-of-service attack on the server. When creating new resources (including calendar collections), clients MUST ensure that the resource name (the last path segment of the resource URI) assigned to the new resource does not expose any data from within the iCalendar resource itself or information about the nature of a calendar collection. This is required to ensure that the presence of a specific iCalendar component or nature of components in a collection cannot be inferred based on the name of a resource. When rolling up free-busy information, more information about a user's events is exposed if busy periods overlap or are adjacent (this tells the client requesting the free-busy information that the calendar owner has at least two events, rather than knowing only that the calendar owner has one or more events during the busy period). Thus, a conservative approach to calendar data privacy would have servers always coalesce such busy periods when they are the same type. Procedure alarms are a known security risk for either clients or servers to handle, particularly when the alarm was created by another agent. Clients and servers are not required to execute such procedure alarms. Security considerations described in iCalendar [RFC2445] and iTIP [RFC2446] are also applicable to CalDAV. Beyond these, CalDAV does not raise any security considerations that are not present in HTTP [RFC2616] and WebDAV [RFC2518], [RFC3253], [RFC3744]. 12. IANA Considerations This document uses one new URN to identify a new XML namespace. The URN conforms to a registry mechanism described in [RFC3688]. 12.1. Namespace Registration Registration request for the CalDAV namespace: URI: urn:ietf:params:xml:ns:caldav Registrant Contact: See the "Authors' Addresses" section of this document. XML: None. Namespace URIs do not represent an XML specification. 13. Acknowledgements The authors would like to thank the following individuals for contributing their ideas and support for writing this specification: Michael Arick, Mario Bonin, Chris Bryant, Scott Carr, Andre Courtemanche, Mike Douglass, Ted Hardie, Marten den Haring, Jeffrey Harris, Sam Hartman, Helge Hess, Jeff McCullough, Alexey Melnikov, Dan Mosedale, Brian Moseley, Francois Perrault, Kervin L. Pierre, Julian F. Reschke, Wilfredo Sanchez Vega, Mike Shaver, Jari Urpalainen, Simon Vaillancourt, and Jim Whitehead. The authors would also like to thank the Calendaring and Scheduling Consortium for advice with this specification, and for organizing interoperability testing events to help refine it. 14. References 14.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2246] Dierks, T. and C. Allen, "The TLS Protocol Version 1.0", RFC 2246, January 1999. [RFC2445] Dawson, F. and Stenerson, D., "Internet Calendaring and Scheduling Core Object Specification (iCalendar)", RFC 2445, November 1998. [RFC2446] Silverberg, S., Mansour, S., Dawson, F., and R. Hopson, "iCalendar Transport-Independent Interoperability Protocol (iTIP) Scheduling Events, BusyTime, To-dos and Journal Entries", RFC 2446, November 1998. [RFC2518] Goland, Y., Whitehead, E., Faizi, A., Carter, S., and D. Jensen, "HTTP Extensions for Distributed Authoring -- WEBDAV", RFC 2518, February 1999. [RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners- Lee, "Hypertext Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999. [RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000. [RFC3253] Clemm, G., Amsden, J., Ellison, T., Kaler, C., and J. Whitehead, "Versioning Extensions to WebDAV (Web Distributed Authoring and Versioning)", RFC 3253, March 2002. [RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January 2004. [RFC3744] Clemm, G., Reschke, J., Sedlar, E., and J. Whitehead, "Web Distributed Authoring and Versioning (WebDAV) Access Control Protocol", RFC 3744, May 2004. [RFC4346] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.1", RFC 4346, April 2006. [RFC4790] Newman, C., Duerst, M., and A. Gulbrandsen, "Internet Application Protocol Collation Registry", RFC 4790, March 2007. [W3C.REC-xml-20060816] Paoli, J., Maler, E., Yergeau, F., Sperberg- McQueen, C., and T. Bray, "Extensible Markup Language (XML) 1.0 (Fourth Edition)", World Wide Web Consortium Recommendation REC-xml- 20060816, August 2006, <http://www.w3.org/TR/2006/REC-xml-20060816>. 14.2. Informative References [RFC2426] Dawson, F. and T. Howes, "vCard MIME Directory Profile", RFC 2426, September 1998. [RFC2739] Small, T., Hennessy, D., and F. Dawson, "Calendar Attributes for vCard and LDAP", RFC 2739, January 2000. [RFC4331] Korver, B. and L. Dusseault, "Quota and Size Properties for Distributed Authoring and Versioning (DAV) Collections", RFC 4331, February 2006. [RFC4511] Sermersheim, J., "Lightweight Directory Access Protocol (LDAP): The Protocol", RFC 4511, June 2006. [rfc2518bis] Dusseault, L., "HTTP Extensions for Distributed Authoring - WebDAV", Work in Progress, December 2006. Appendix A. CalDAV Method Privilege Table (Normative) The following table extends the WebDAV Method Privilege Table specified in Appendix B of [RFC3744]. +------------+------------------------------------------------------+ | METHOD | PRIVILEGES | +------------+------------------------------------------------------+ | MKCALENDAR | DAV:bind | | REPORT | DAV:read or CALDAV:read-free-busy (on all referenced | | | resources) | +------------+------------------------------------------------------+ Appendix B. Calendar Collections Used in the Examples This appendix shows the calendar object resources contained in the calendar collection queried in the examples throughout this document. The content of the calendar collection is being shown as if it were returned by a CALDAV:calendar-query REPORT request designed to return all the calendar data in the collection: >> Request << REPORT /bernard/work/ HTTP/1.1 Host: cal.example.com Depth: 1 Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <C:calendar-query xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:prop> <D:getetag/> <C:calendar-data/> </D:prop> <C:filter> <C:comp-filter name="VCALENDAR"/> </C:filter> </C:calendar-query> >> Response << HTTP/1.1 207 Multi-Status Content-Type: application/xml; charset="utf-8" Content-Length: xxxx <?xml version="1.0" encoding="utf-8" ?> <D:multistatus xmlns:D="DAV:" xmlns:C="urn:ietf:params:xml:ns:caldav"> <D:response> <D:href>http://cal.example.com/bernard/work/abcd1.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd1"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001102Z DTSTART;TZID=US/Eastern:20060102T100000 DURATION:PT1H SUMMARY:Event #1 Description:Go Steelers! UID:74855313FA803DA593CD579A@example.com END:VEVENT END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd2.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd2"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060102T120000 DURATION:PT1H RRULE:FREQ=DAILY;COUNT=5 SUMMARY:Event #2 UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060104T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060104T120000 SUMMARY:Event #2 bis UID:00959BC664CA650E933C892C@example.com END:VEVENT BEGIN:VEVENT DTSTAMP:20060206T001121Z DTSTART;TZID=US/Eastern:20060106T140000 DURATION:PT1H RECURRENCE-ID;TZID=US/Eastern:20060106T120000 SUMMARY:Event #2 bis bis UID:00959BC664CA650E933C892C@example.com END:VEVENT END:VCALENDAR
EID 4164 (Verified) is as follows:

Section: Appendix B

Original Text:

   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART;TZID=US/Eastern:20060104T140000
   DURATION:PT1H
   RECURRENCE-ID;TZID=US/Eastern:20060104T120000
   SUMMARY:Event #2 bis
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   END:VCALENDAR

Corrected Text:

   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART;TZID=US/Eastern:20060104T140000
   DURATION:PT1H
   RECURRENCE-ID;TZID=US/Eastern:20060104T120000
   SUMMARY:Event #2 bis
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   BEGIN:VEVENT
   DTSTAMP:20060206T001121Z
   DTSTART;TZID=US/Eastern:20060106T140000
   DURATION:PT1H
   RECURRENCE-ID;TZID=US/Eastern:20060106T120000
   SUMMARY:Event #2 bis bis
   UID:00959BC664CA650E933C892C@example.com
   END:VEVENT
   END:VCALENDAR
Notes:
"Event #2 bis bis" seems to be required.
</C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd3.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd3"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VEVENT ATTENDEE;PARTSTAT=ACCEPTED;ROLE=CHAIR:mailto:cyrus@example.com ATTENDEE;PARTSTAT=NEEDS-ACTION:mailto:lisa@example.com DTSTAMP:20060206T001220Z DTSTART;TZID=US/Eastern:20060104T100000 DURATION:PT1H LAST-MODIFIED:20060206T001330Z ORGANIZER:mailto:cyrus@example.com SEQUENCE:1 STATUS:TENTATIVE SUMMARY:Event #3 UID:DC6C50A017428C5216A2F1CD@example.com X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com END:VEVENT END:VCALENDAR
EID 4165 (Verified) is as follows:

Section: Appendix B

Original Text:

   STATUS:TENTATIVE
   SUMMARY:Event #3
   UID:DC6C50A017428C5216A2F1CD@example.com
   END:VEVENT
   END:VCALENDAR

Corrected Text:

   STATUS:TENTATIVE
   SUMMARY:Event #3
   UID:DC6C50A017428C5216A2F1CD@example.com
   X-ABC-GUID:E1CX5Dr-0007ym-Hz@example.com
   END:VEVENT
   END:VCALENDAR
Notes:
abcd3.ics seems to have X-ABC-GUID property.
</C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd4.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd4"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTODO DTSTAMP:20060205T235335Z DUE;VALUE=DATE:20060104 STATUS:NEEDS-ACTION SUMMARY:Task #1 UID:DDDEEB7915FA61233B861457@example.com BEGIN:VALARM ACTION:AUDIO TRIGGER;RELATED=END:-PT10M
EID 4166 (Verified) is as follows:

Section: Appendix B

Original Text:

   TRIGGER;RELATED=START:-PT10M

Corrected Text:

   TRIGGER;RELATED=END:-PT10M
Notes:
abcd4.ics RELATED parameter is not START but END, because TODO has only DUE property.
END:VALARM END:VTODO END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd5.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd5"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTIMEZONE LAST-MODIFIED:20040110T032845Z TZID:US/Eastern BEGIN:DAYLIGHT DTSTART:20000404T020000 RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4 TZNAME:EDT TZOFFSETFROM:-0500 TZOFFSETTO:-0400 END:DAYLIGHT BEGIN:STANDARD DTSTART:20001026T020000 RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10 TZNAME:EST TZOFFSETFROM:-0400 TZOFFSETTO:-0500 END:STANDARD END:VTIMEZONE BEGIN:VTODO DTSTAMP:20060205T235300Z DUE;TZID=US/Eastern:20060106T120000 LAST-MODIFIED:20060205T235308Z SEQUENCE:1 STATUS:NEEDS-ACTION SUMMARY:Task #2 UID:E10BA47467C5C69BB74E8720@example.com BEGIN:VALARM ACTION:AUDIO TRIGGER;RELATED=END:-PT10M END:VALARM END:VTODO END:VCALENDAR </C:calendar-data>
EID 4167 (Verified) is as follows:

Section: Appendix B

Original Text:

           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;VALUE=DATE:20060106
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=START:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>

Corrected Text:

           <D:getetag>"fffff-abcd5"</D:getetag>
           <C:calendar-data>BEGIN:VCALENDAR
   VERSION:2.0
   PRODID:-//Example Corp.//CalDAV Client//EN
   BEGIN:VTIMEZONE
   LAST-MODIFIED:20040110T032845Z
   TZID:US/Eastern
   BEGIN:DAYLIGHT
   DTSTART:20000404T020000
   RRULE:FREQ=YEARLY;BYDAY=1SU;BYMONTH=4
   TZNAME:EDT
   TZOFFSETFROM:-0500
   TZOFFSETTO:-0400
   END:DAYLIGHT
   BEGIN:STANDARD
   DTSTART:20001026T020000
   RRULE:FREQ=YEARLY;BYDAY=-1SU;BYMONTH=10
   TZNAME:EST
   TZOFFSETFROM:-0400
   TZOFFSETTO:-0500
   END:STANDARD
   END:VTIMEZONE
   BEGIN:VTODO
   DTSTAMP:20060205T235300Z
   DUE;TZID=US/Eastern:20060106T120000
   LAST-MODIFIED:20060205T235308Z
   SEQUENCE:1
   STATUS:NEEDS-ACTION
   SUMMARY:Task #2
   UID:E10BA47467C5C69BB74E8720@example.com
   BEGIN:VALARM
   ACTION:AUDIO
   TRIGGER;RELATED=END:-PT10M
   END:VALARM
   END:VTODO
   END:VCALENDAR
   </C:calendar-data>
Notes:
1. "Task #2" seems to be intended to show DUE with US/Eastern timezone, because "Task #1" is DATE.

2. RELATED would be not START, but END.
</D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd6.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd6"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTODO COMPLETED:20051223T122322Z DTSTAMP:20060205T235400Z DUE;VALUE=DATE:20051225 LAST-MODIFIED:20060205T235308Z SEQUENCE:1 STATUS:COMPLETED SUMMARY:Task #3 UID:E10BA47467C5C69BB74E8722@example.com END:VTODO END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd7.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd7"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VTODO DTSTAMP:20060205T235600Z DUE;VALUE=DATE:20060101 LAST-MODIFIED:20060205T235308Z SEQUENCE:1 STATUS:CANCELLED SUMMARY:Task #4 UID:E10BA47467C5C69BB74E8725@example.com END:VTODO END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://cal.example.com/bernard/work/abcd8.ics</D:href> <D:propstat> <D:prop> <D:getetag>"fffff-abcd8"</D:getetag> <C:calendar-data>BEGIN:VCALENDAR VERSION:2.0 PRODID:-//Example Corp.//CalDAV Client//EN BEGIN:VFREEBUSY ORGANIZER;CN="Bernard Desruisseaux":mailto:bernard@example.com UID:76ef34-54a3d2@example.com DTSTAMP:20050530T123421Z DTSTART:20060101T000000Z DTEND:20060108T000000Z FREEBUSY:20050531T230000Z/20050601T010000Z FREEBUSY;FBTYPE=BUSY-TENTATIVE:20060102T100000Z/20060102T120000Z FREEBUSY:20060103T100000Z/20060103T120000Z FREEBUSY:20060104T100000Z/20060104T120000Z FREEBUSY;FBTYPE=BUSY-UNAVAILABLE:20060105T100000Z/20060105T120000Z FREEBUSY:20060106T100000Z/20060106T120000Z END:VFREEBUSY END:VCALENDAR </C:calendar-data> </D:prop> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> </D:multistatus> Authors' Addresses Cyrus Daboo Apple Inc. 1 Infinite Loop Cupertino, CA 95014 USA EMail: cyrus@daboo.name URI: http://www.apple.com/ Bernard Desruisseaux Oracle Corporation 600 Blvd. de Maisonneuve West Suite 1900 Montreal, QC H3A 3J2 CANADA EMail: bernard.desruisseaux@oracle.com URI: http://www.oracle.com/ Lisa Dusseault CommerceNet 169 University Ave. Palo Alto, CA 94301 USA EMail: ldusseault@commerce.net URI: http://commerce.net/ Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society.